View Issue Details

IDProjectCategoryView StatusLast Update
0000081AlmaLinux-8anacondapublic2021-06-08 16:22
Reporterbagel Assigned Toalukoshko  
Status closedResolutionfixed 
Summary0000081: anaconda doesn't see 2nd disk
DescriptionI tried to install to the 2nd disk but it doesn't show up. It is an old IDE disk, and the 1st disk is SATA. So perhaps the IDE driver is not being loaded.
TagsNo tags attached.



2021-05-26 11:48

developer   ~0000219

What IDE controlled do you use? provides support for outdated hardware so maybe they have driver:


2021-05-26 15:48

reporter   ~0000223

Fedora 34 sees the disk. Here is the lspci -v info for the IDE (note driver pata_atiixp):
00:14.1 IDE interface: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 IDE Controller (prog-if 8a [ISA Compatibility mode controller, supports both channels switched to PCI native mode, supports bus mastering])
    Subsystem: Gigabyte Technology Co., Ltd Device 5002
    Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 16, NUMA node 0
    Memory at 000001f0 (32-bit, non-prefetchable) [virtual] [size=8]
    Memory at 000003f0 (type 3, non-prefetchable) [virtual]
    Memory at 00000170 (32-bit, non-prefetchable) [virtual] [size=8]
    Memory at 00000370 (type 3, non-prefetchable) [virtual]
    I/O ports at fa00 [virtual] [size=16]
    Capabilities: <access denied>
    Kernel driver in use: pata_atiixp
    Kernel modules: pata_atiixp, pata_acpi, ata_generic


2021-05-26 15:53

developer   ~0000224

pata_atiixp was removed from RHEL8: project provides ISO with this driver for 8.3:

Issue History

Date Modified Username Field Change
2021-05-20 20:19 bagel New Issue
2021-05-26 11:46 alukoshko Assigned To => alukoshko
2021-05-26 11:46 alukoshko Status new => assigned
2021-05-26 11:48 alukoshko Note Added: 0000219
2021-05-26 15:48 bagel Note Added: 0000223
2021-05-26 15:53 alukoshko Note Added: 0000224
2021-06-08 16:22 alukoshko Status assigned => closed
2021-06-08 16:22 alukoshko Resolution open => fixed