View Issue Details

IDProjectCategoryView StatusLast Update
0000027AlmaLinux-8open-vm-toolspublic2023-03-06 19:40
Reportercorporategadfly Assigned Toalukoshko  
PriorityhighSeveritymajorReproducibilityalways
Status assignedResolutionopen 
Summary0000027: Guest customization fails in vmware when using AlmaLinux 8.3 RC as source template
DescriptionIn an enterprise setting, it is typical to use a source VM template and then deploy multiple VMs using that template. Unfortunately, guest customizations (e.g., setting of hostname, interface settings, DNS, etc.) fails during VM deploy.

See https://github.com/vmware/open-vm-tools/issues/497 for some investigative work.

To help adoption of AlmaLinux, deployment using vmware (with templates) is essential.
TagsNo tags attached.
abrt_hash
URL

Activities

corporategadfly

2021-03-31 14:17

reporter   ~0000092

Identical experience with AlmaLinux 8.3.

alukoshko

2021-03-31 16:10

administrator   ~0000093

Please provide steps to reproduce.
What VMware version are you using? What should be customized?

corporategadfly

2021-03-31 16:14

reporter   ~0000094

vSphere Client version 6.7.0.46000

So, we typically customize the following:
* hostname
* domain
* DNS entries
* assignment for interfaces (typically two)

Works in RHEL8 and CentOS8 (as long as perl and open-vm-tools is installed).

corporategadfly

2021-03-31 16:15

reporter   ~0000095

Our VSS folks use a custom CLI for initiating the VM creation so I don't know the internal details but generic details are available at: https://docs.vmware.com/en/VMware-vSphere/7.0/com.vmware.vsphere.vm_admin.doc/GUID-EB5F090E-723C-4470-B640-50B35D1EC016.html

corporategadfly

2021-04-02 01:29

reporter   ~0000107

Here is an example of a customization which sets hostname, ip addresses, DNS, etc.:
<code>
{
  "hostname": "hostname-1",
  "dhcp": false,
  "domain": "x.y.z",
  "dns": [
    "128.x.x.x",
    "128.y.y.y"
  ],
  "interfaces": [
    {
      "dhcp": false,
      "ip": "10.192.228.58",
      "mask": "255.255.255.128",
      "gateway": [
        "10.192.228.1"
      ]
    },
    {
      "dhcp": false,
      "ip": "10.192.228.186",
      "mask": "255.255.255.128",
      "gateway": [
        "10.192.228.129"
      ]
    }
  ]
}
</code>

corporategadfly

2021-05-06 23:08

reporter   ~0000180

Any updates?

alukoshko

2021-05-07 18:19

administrator   ~0000181

Hi! I wasn't able to reproduce the problem but I haven't tried via CLI.
Could you help a bit with this issue?
Please attach open-vm-tools logs from AlmaLinux and from RHEL/CentOS with the same customization if you can.
I'll try to find out what goes wrong and what's the difference.

Also will you able to help with testing of patched open-vm-tools package if I attach it here? I have an idea how to modify it.

corporategadfly

2021-05-07 18:40

reporter   ~0000182

Absolutely willing to help with testing if I get a patched open-vm-tools package.

I will gather the logs as soon as I'm able to setup a new AlmaLinux template and a new VM deploy (using that template).

corporategadfly

2021-05-07 20:23

reporter   ~0000183

added toolsDeployPkg.log (one from successful Centos 8 and one from failed AlmaLinux).
almalinux-bug-27-almalinux-8.4-failed-toolsDeployPkg.log (29,059 bytes)   
[2021-05-07T18:49:30.780Z] [   debug] ## Starting deploy pkg operation
[2021-05-07T18:49:30.780Z] [   debug] Deploying /var/run/a24d1360/imcf-hWDDmN
[2021-05-07T18:49:30.780Z] [    info] Initializing deployment module.
[2021-05-07T18:49:30.780Z] [    info] Cleaning old state files.
[2021-05-07T18:49:30.780Z] [    info] EXIT STATE 'INPROGRESS'.
[2021-05-07T18:49:30.780Z] [   debug] Setting deploy error: 'Error removing lock '/var/log/.vmware-deploy.INPROGRESS'.(No such file or directory)'.
[2021-05-07T18:49:30.780Z] [    info] EXIT STATE 'Done'.
[2021-05-07T18:49:30.781Z] [   debug] Setting deploy error: 'Error removing lock '/var/log/.vmware-deploy.Done'.(No such file or directory)'.
[2021-05-07T18:49:30.781Z] [    info] EXIT STATE 'ERRORED'.
[2021-05-07T18:49:30.781Z] [   debug] Setting deploy error: 'Error removing lock '/var/log/.vmware-deploy.ERRORED'.(No such file or directory)'.
[2021-05-07T18:49:30.781Z] [   debug] Setting deploy error: 'Success.'.
[2021-05-07T18:49:30.781Z] [    info] Deploying cabinet file '/var/run/a24d1360/imcf-hWDDmN'.
[2021-05-07T18:49:30.781Z] [    info] Transitioning from state '(null)' to state 'INPROGRESS'.
[2021-05-07T18:49:30.781Z] [    info] ENTER STATE 'INPROGRESS'.
[2021-05-07T18:49:30.784Z] [    info] Reading cabinet file '/var/run/a24d1360/imcf-hWDDmN' and will extract it to '/var/run/.vmware-imgcust-daeCZkv'.
[2021-05-07T18:49:30.784Z] [    info] Flags in the header: 0.
[2021-05-07T18:49:30.784Z] [    info] Original deployment command: '/usr/bin/perl -I/tmp/.vmware/linux/deploy/scripts /tmp/.vmware/linux/deploy/scripts/Customize.pl /tmp/.vmware/linux/deploy/cust.cfg'.
[2021-05-07T18:49:30.784Z] [    info] Actual deployment command: '/usr/bin/perl -I/var/run/.vmware-imgcust-daeCZkv/scripts /var/run/.vmware-imgcust-daeCZkv/scripts/Customize.pl /var/run/.vmware-imgcust-daeCZkv/cust.cfg'.
[2021-05-07T18:49:30.784Z] [    info] Extracting package files.
[2021-05-07T18:49:30.856Z] [   debug] Check if cust.cfg exists.
[2021-05-07T18:49:30.856Z] [    info] cust.cfg is found in '/var/run/.vmware-imgcust-daeCZkv' directory.
[2021-05-07T18:49:30.856Z] [   debug] Command to exec : '/usr/bin/cloud-init'.
[2021-05-07T18:49:30.856Z] [    info] sizeof ProcessInternal is 56
[2021-05-07T18:49:30.858Z] [    info] Returning, pending output from stdout
[2021-05-07T18:49:30.858Z] [    info] Returning, pending output from stderr
[2021-05-07T18:49:30.864Z] [   error] execv failed to run (/usr/bin/cloud-init), errno=(2), error message:(No such file or directory)
[2021-05-07T18:49:30.871Z] [    info] Process exited normally after 0 seconds, returned 127
[2021-05-07T18:49:30.871Z] [    info] No more output from stdout
[2021-05-07T18:49:30.871Z] [    info] No more output from stderr
[2021-05-07T18:49:30.871Z] [    info] Customization command output:
''.
[2021-05-07T18:49:30.871Z] [   error] Customization command failed with exitcode: 127, stderr: ''.
[2021-05-07T18:49:30.871Z] [    info] cloud-init is not installed.
[2021-05-07T18:49:30.871Z] [    info] Executing traditional GOSC workflow.
[2021-05-07T18:49:30.871Z] [   debug] Command to exec : '/usr/bin/perl'.
[2021-05-07T18:49:30.871Z] [    info] sizeof ProcessInternal is 56
[2021-05-07T18:49:30.871Z] [    info] Returning, pending output from stdout
[2021-05-07T18:49:30.871Z] [    info] Returning, pending output from stderr
[2021-05-07T18:49:31.271Z] [    info] Saving output from stdout
[2021-05-07T18:49:31.272Z] [    info] Saving output from stdout
[2021-05-07T18:49:31.272Z] [    info] Saving output from stdout
[2021-05-07T18:49:31.272Z] [    info] Saving output from stdout
[2021-05-07T18:49:31.272Z] [    info] Saving output from stdout
[2021-05-07T18:49:31.272Z] [    info] Saving output from stdout
[2021-05-07T18:49:31.372Z] [    info] Saving output from stdout
[2021-05-07T18:49:31.372Z] [    info] Saving output from stdout
[2021-05-07T18:49:31.372Z] [    info] Saving output from stdout
[2021-05-07T18:49:31.472Z] [    info] Saving output from stdout
[2021-05-07T18:49:31.472Z] [    info] Saving output from stdout
[2021-05-07T18:49:31.472Z] [    info] Saving output from stdout
[2021-05-07T18:49:31.472Z] [    info] Saving output from stdout
[2021-05-07T18:49:31.472Z] [    info] Saving output from stdout
[2021-05-07T18:49:31.472Z] [    info] Saving output from stdout
[2021-05-07T18:49:31.472Z] [    info] Saving output from stdout
[2021-05-07T18:49:31.472Z] [    info] Saving output from stdout
[2021-05-07T18:49:31.572Z] [    info] Saving output from stdout
[2021-05-07T18:49:31.572Z] [    info] Saving output from stdout
[2021-05-07T18:49:31.572Z] [    info] Saving output from stdout
[2021-05-07T18:49:31.572Z] [    info] Saving output from stdout
[2021-05-07T18:49:31.572Z] [    info] Saving output from stdout
[2021-05-07T18:49:31.572Z] [    info] Saving output from stdout
[2021-05-07T18:49:31.673Z] [    info] Process exited normally after 0 seconds, returned 0
[2021-05-07T18:49:31.673Z] [    info] No more output from stdout
[2021-05-07T18:49:31.673Z] [    info] No more output from stderr
[2021-05-07T18:49:31.673Z] [    info] Customization command output:
=================== Perl script log start =================
DEBUG: Creating directory /var/lock/vmware 
DEBUG: Opening /var/lock/vmware/gosc in O_CREAT|O_EXCL|O_WRONLY mode 
INFO: Opening file name /var/run/.vmware-imgcust-daeCZkv/cust.cfg. 
DEBUG: Processing line: '[NETWORK]' 
DEBUG: FOUND CATEGORY = NETWORK 
DEBUG: Processing line: 'NETWORKING = yes' 
DEBUG: ADDED KEY-VAL :: 'NETWORK|NETWORKING' = 'yes' 
DEBUG: Processing line: 'BOOTPROTO = dhcp' 
DEBUG: ADDED KEY-VAL :: 'NETWORK|BOOTPROTO' = 'dhcp' 
DEBUG: Processing line: 'HOSTNAME = alma-host' 
DEBUG: ADDED KEY-VAL :: 'NETWORK|HOSTNAME' = 'alma-host' 
DEBUG: Processing line: 'DOMAINNAME = xxx.tld' 
DEBUG: ADDED KEY-VAL :: 'NETWORK|DOMAINNAME' = 'xxx.tld' 
DEBUG: Processing line: '' 
DEBUG: Empty line. Ignored. 
DEBUG: Processing line: '[NIC-CONFIG]' 
DEBUG: FOUND CATEGORY = NIC-CONFIG 
DEBUG: Processing line: 'NICS = NIC1,NIC2' 
DEBUG: ADDED KEY-VAL :: 'NIC-CONFIG|NICS' = 'NIC1,NIC2' 
DEBUG: Processing line: '' 
DEBUG: Empty line. Ignored. 
DEBUG: Processing line: '[NIC1]' 
DEBUG: FOUND CATEGORY = NIC1 
DEBUG: Processing line: 'MACADDR = 00:50:56:92:46:40' 
DEBUG: ADDED KEY-VAL :: 'NIC1|MACADDR' = '00:50:56:92:46:40' 
DEBUG: Processing line: 'PRIMARY = yes' 
DEBUG: ADDED KEY-VAL :: 'NIC1|PRIMARY' = 'yes' 
DEBUG: Processing line: 'ONBOOT = yes' 
DEBUG: ADDED KEY-VAL :: 'NIC1|ONBOOT' = 'yes' 
DEBUG: Processing line: 'IPv4_MODE = BACKWARDS_COMPATIBLE' 
DEBUG: ADDED KEY-VAL :: 'NIC1|IPv4_MODE' = 'BACKWARDS_COMPATIBLE' 
DEBUG: Processing line: 'BOOTPROTO = static' 
DEBUG: ADDED KEY-VAL :: 'NIC1|BOOTPROTO' = 'static' 
DEBUG: Processing line: 'IPADDR = 10.192.228.58' 
DEBUG: ADDED KEY-VAL :: 'NIC1|IPADDR' = '10.192.228.58' 
DEBUG: Processing line: 'NETMASK = 255.255.255.128' 
DEBUG: ADDED KEY-VAL :: 'NIC1|NETMASK' = '255.255.255.128' 
DEBUG: Processing line: 'GATEWAY = 10.192.228.1' 
DEBUG: ADDED KEY-VAL :: 'NIC1|GATEWAY' = '10.192.228.1' 
DEBUG: Processing line: '' 
DEBUG: Empty line. Ignored. 
DEBUG: Processing line: '[NIC2]' 
DEBUG: FOUND CATEGORY = NIC2 
DEBUG: Processing line: 'MACADDR = 00:50:56:92:17:f7' 
DEBUG: ADDED KEY-VAL :: 'NIC2|MACADDR' = '00:50:56:92:17:f7' 
DEBUG: Processing line: 'ONBOOT = yes' 
DEBUG: ADDED KEY-VAL :: 'NIC2|ONBOOT' = 'yes' 
DEBUG: Processing line: 'IPv4_MODE = BACKWARDS_COMPATIBLE' 
DEBUG: ADDED KEY-VAL :: 'NIC2|IPv4_MODE' = 'BACKWARDS_COMPATIBLE' 
DEBUG: Processing line: 'BOOTPROTO = static' 
DEBUG: ADDED KEY-VAL :: 'NIC2|BOOTPROTO' = 'static' 
DEBUG: Processing line: 'IPADDR = 10.192.228.186' 
DEBUG: ADDED KEY-VAL :: 'NIC2|IPADDR' = '10.192.228.186' 
DEBUG: Processing line: 'NETMASK = 255.255.255.128' 
DEBUG: ADDED KEY-VAL :: 'NIC2|NETMASK' = '255.255.255.128' 
DEBUG: Processing line: 'GATEWAY = 10.192.228.129' 
DEBUG: ADDED KEY-VAL :: 'NIC2|GATEWAY' = '10.192.228.129' 
DEBUG: Processing line: '' 
DEBUG: Empty line. Ignored. 
DEBUG: Processing line: '' 
DEBUG: Empty line. Ignored. 
DEBUG: Processing line: '[DNS]' 
DEBUG: FOUND CATEGORY = DNS 
DEBUG: Processing line: 'DNSFROMDHCP=no' 
DEBUG: ADDED KEY-VAL :: 'DNS|DNSFROMDHCP' = 'no' 
DEBUG: Processing line: '' 
DEBUG: Empty line. Ignored. 
DEBUG: Processing line: 'NAMESERVER|1 = 128.100.100.128' 
DEBUG: ADDED KEY-VAL :: 'DNS|NAMESERVER|1' = '128.100.100.128' 
DEBUG: Processing line: 'NAMESERVER|2 = 128.100.96.34' 
DEBUG: ADDED KEY-VAL :: 'DNS|NAMESERVER|2' = '128.100.96.34' 
DEBUG: Reading issue file ...  
DEBUG: Command: 'cat /etc/issue' 
DEBUG: Result: \S
Kernel \r on an \m

 
DEBUG: Exit Code: 0 
DEBUG: \S
Kernel \r on an \m

 
DEBUG: Reading issue file ...  
DEBUG: Command: 'cat /etc/issue' 
DEBUG: Result: \S
Kernel \r on an \m

 
DEBUG: Exit Code: 0 
DEBUG: \S
Kernel \r on an \m

 
DEBUG: Reading /etc/os-release file ...  
DEBUG: opening file /etc/os-release. 
DEBUG: Match found   : Line = ID="almalinux"
 
DEBUG: Actual String : "almalinux" 
DEBUG: ID: "almalinux" 
DEBUG: opening file /etc/os-release. 
DEBUG: Match found   : Line = VERSION_ID="8.4"
 
DEBUG: Actual String : "8.4" 
DEBUG: Version: "8.4" 
WARNING: Amazon Linux flavor not detected 
DEBUG: Reading issue file ...  
DEBUG: Command: 'cat /etc/issue' 
DEBUG: Result: \S
Kernel \r on an \m

 
DEBUG: Exit Code: 0 
DEBUG: \S
Kernel \r on an \m

 
DEBUG: Reading redhat-release file ...  
DEBUG: Command: 'cat /etc/redhat-release' 
DEBUG: Result: AlmaLinux release 8.4 Beta (Electric Cheetah)
 
DEBUG: Exit Code: 0 
DEBUG: AlmaLinux release 8.4 Beta (Electric Cheetah)
 
WARNING: Redhat flavor not detected 
DEBUG: Reading issue file ...  
DEBUG: Command: 'cat /etc/issue' 
DEBUG: Result: \S
Kernel \r on an \m

 
DEBUG: Exit Code: 0 
DEBUG: \S
Kernel \r on an \m

 
DEBUG: Reading redhat-release file ...  
DEBUG: Command: 'cat /etc/redhat-release' 
DEBUG: Result: AlmaLinux release 8.4 Beta (Electric Cheetah)
 
DEBUG: Exit Code: 0 
DEBUG: AlmaLinux release 8.4 Beta (Electric Cheetah)
 
WARNING: Redhat flavor not detected 
INFO: Detected distribution: RedHat Linux Distribution 
DEBUG: Reading issue file ...  
DEBUG: Command: 'cat /etc/issue' 
DEBUG: Result: \S
Kernel \r on an \m

 
DEBUG: Exit Code: 0 
DEBUG: \S
Kernel \r on an \m

 
DEBUG: Reading redhat-release file ...  
DEBUG: Command: 'cat /etc/redhat-release' 
DEBUG: Result: AlmaLinux release 8.4 Beta (Electric Cheetah)
 
DEBUG: Exit Code: 0 
DEBUG: AlmaLinux release 8.4 Beta (Electric Cheetah)
 
WARNING: Redhat flavor not detected 
WARNING: Unknown RedHat Linux Distribution distribution flavour. 
INFO: Customization instance RedHatCustomization loaded. 
INFO: Customization started 
DEBUG: Command: 'hostname 2>/dev/null' 
DEBUG: Result: alm8-template
 
DEBUG: Exit Code: 0 
DEBUG: TimedCommand: 'hostname -f 2>/dev/null' with timeout of 5 sec 
DEBUG: Fetching result from /tmp/timed_out_tmp_file_927 
DEBUG: TimedResult: alm8-template
 
DEBUG: opening file /etc/sysconfig/network. 
INFO: OLD HOST NAME =  
INFO: Marker file exists or is undefined, pre-customization is not needed 
INFO: Customizing Network settings ...  
DEBUG: opening file /etc/sysconfig/network-scripts/ifcfg-ens192. 
DEBUG: DHCPV6C is '' 
DEBUG: opening file /etc/sysconfig/network-scripts/ifcfg-ens192. 
DEBUG: DHCPV6C_OPTIONS is '' 
DEBUG: opening file /etc/sysconfig/network-scripts/ifcfg-ens192. 
DEBUG: IPV6_AUTOCONF is '' 
DEBUG: opening file /etc/sysconfig/network-scripts/ifcfg-ens192. 
DEBUG: Match found   : Line = IPV6INIT=no
 
DEBUG: Actual String : no 
DEBUG: IPV6INIT is 'no' 
INFO: Erasing DHCP leases 
DEBUG: Command: 'pkill dhclient' 
DEBUG: Result:  
DEBUG: Exit Code: 256 
DEBUG: Command: 'rm -f /var/lib/dhcp/*' 
DEBUG: Result:  
DEBUG: Exit Code: 0 
DEBUG: Command: 'rm -f /var/lib/dhclient/*' 
DEBUG: Result:  
DEBUG: Exit Code: 0 
INFO: Resetting Network Administration Tool (redhat-config-network) 
DEBUG: Command: 'rm -rf /etc/sysconfig/networking/devices' 
DEBUG: Result:  
DEBUG: Exit Code: 0 
DEBUG: Command: 'rm -rf /etc/sysconfig/networking/profiles' 
DEBUG: Result:  
DEBUG: Exit Code: 0 
INFO: Primary NIC is 00:50:56:92:46:40 
DEBUG: Command: '/sbin/ifconfig -a' 
DEBUG: Result: ens192: flags=4098<BROADCAST,MULTICAST>  mtu 1500
        ether 00:50:56:92:46:40  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

ens224: flags=4098<BROADCAST,MULTICAST>  mtu 1500
        ether 00:50:56:92:17:f7  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 1000  (Local Loopback)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

 
DEBUG: Exit Code: 0 
DEBUG: opening file /etc/sysconfig/network. 
DEBUG: Line : # Created by anaconda
 
INFO: GATEWAYDEV not found, created with ether 
INFO: GATEWAY not found 
INFO: Created with 10.192.228.1 
DEBUG: opening file for writing (/etc/sysconfig/network). 
DEBUG: Command: 'chmod 644 /etc/sysconfig/network' 
DEBUG: Result:  
DEBUG: Exit Code: 0 
DEBUG: Command: 'hostname alma-host' 
DEBUG: Result:  
DEBUG: Exit Code: 0 
INFO: Customizing NICS ...  
DEBUG: Command: 'modprobe pcnet32 2> /dev/null' 
DEBUG: Result:  
DEBUG: Exit Code: 256 
DEBUG: Command: '/sbin/ifconfig eth0 2> /dev/null' 
DEBUG: Result:  
DEBUG: Exit Code: 256 
INFO: Customizing NICS. { NIC1,NIC2 } 
INFO: Customizing NIC NIC1 
DEBUG: Command: '/sbin/ifconfig -a' 
DEBUG: Result: ens192: flags=4098<BROADCAST,MULTICAST>  mtu 1500
        ether 00:50:56:92:46:40  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

ens224: flags=4098<BROADCAST,MULTICAST>  mtu 1500
        ether 00:50:56:92:17:f7  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 1000  (Local Loopback)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

 
DEBUG: Exit Code: 0 
DEBUG: Deleting 0 files... 
DEBUG: Command: '/sbin/ifconfig -a' 
DEBUG: Result: ens192: flags=4098<BROADCAST,MULTICAST>  mtu 1500
        ether 00:50:56:92:46:40  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

ens224: flags=4098<BROADCAST,MULTICAST>  mtu 1500
        ether 00:50:56:92:17:f7  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 1000  (Local Loopback)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

 
DEBUG: Exit Code: 0 
INFO: Writing ifcfg file for NIC suffix = ether 
INFO: Query config for ^(NIC1\|IPv6ADDR\|) 
INFO: Query config for ^(NIC1\|IPv6NETMASK\|) 
DEBUG: Command: '/sbin/ifconfig -a' 
DEBUG: Result: ens192: flags=4098<BROADCAST,MULTICAST>  mtu 1500
        ether 00:50:56:92:46:40  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

ens224: flags=4098<BROADCAST,MULTICAST>  mtu 1500
        ether 00:50:56:92:17:f7  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 1000  (Local Loopback)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

 
DEBUG: Exit Code: 0 
DEBUG: opening file for writing (/etc/sysconfig/network-scripts/ifcfg-ether). 
DEBUG: Command: 'chmod 644 /etc/sysconfig/network-scripts/ifcfg-ether' 
DEBUG: Result:  
DEBUG: Exit Code: 0 
INFO: Query config for ^NIC1(\|IPv6GATEWAY\|) 
INFO: Configuring route (gateway settings) for ether. 
INFO: Configuring route 10.192.228.1 
DEBUG: opening file /etc/sysconfig/network-scripts/route-ether for appending. 
DEBUG: opening file /etc/sysconfig/network-scripts/route6-ether for appending. 
INFO: Customizing NIC NIC2 
DEBUG: Command: '/sbin/ifconfig -a' 
DEBUG: Result: ens192: flags=4098<BROADCAST,MULTICAST>  mtu 1500
        ether 00:50:56:92:46:40  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

ens224: flags=4098<BROADCAST,MULTICAST>  mtu 1500
        ether 00:50:56:92:17:f7  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 1000  (Local Loopback)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

 
DEBUG: Exit Code: 0 
DEBUG: Deleting 0 files... 
DEBUG: Command: '/sbin/ifconfig -a' 
DEBUG: Result: ens192: flags=4098<BROADCAST,MULTICAST>  mtu 1500
        ether 00:50:56:92:46:40  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

ens224: flags=4098<BROADCAST,MULTICAST>  mtu 1500
        ether 00:50:56:92:17:f7  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 1000  (Local Loopback)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

 
DEBUG: Exit Code: 0 
INFO: Writing ifcfg file for NIC suffix = ether 
INFO: Query config for ^(NIC2\|IPv6ADDR\|) 
INFO: Query config for ^(NIC2\|IPv6NETMASK\|) 
DEBUG: Command: '/sbin/ifconfig -a' 
DEBUG: Result: ens192: flags=4098<BROADCAST,MULTICAST>  mtu 1500
        ether 00:50:56:92:46:40  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

ens224: flags=4098<BROADCAST,MULTICAST>  mtu 1500
        ether 00:50:56:92:17:f7  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 1000  (Local Loopback)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

 
DEBUG: Exit Code: 0 
DEBUG: opening file for writing (/etc/sysconfig/network-scripts/ifcfg-ether). 
DEBUG: Command: 'chmod 644 /etc/sysconfig/network-scripts/ifcfg-ether' 
DEBUG: Result:  
DEBUG: Exit Code: 0 
INFO: Query config for ^NIC2(\|IPv6GATEWAY\|) 
INFO: Cleanup default IPv4 route for ether. 
DEBUG: Command: '/bin/cat /etc/sysconfig/network-scripts/route-ether | /bin/grep -v default > /etc/sysconfig/network-scripts/route-ether.tmp' 
DEBUG: Result:  
DEBUG: Exit Code: 256 
DEBUG: Command: '/bin/mv -f /etc/sysconfig/network-scripts/route-ether.tmp /etc/sysconfig/network-scripts/route-ether' 
DEBUG: Result:  
DEBUG: Exit Code: 0 
INFO: Cleanup default IPv6 route for ether. 
DEBUG: Command: '/bin/cat /etc/sysconfig/network-scripts/route6-ether | /bin/grep -v default > /etc/sysconfig/network-scripts/route6-ether.tmp' 
DEBUG: Result:  
DEBUG: Exit Code: 256 
DEBUG: Command: '/bin/mv -f /etc/sysconfig/network-scripts/route6-ether.tmp /etc/sysconfig/network-scripts/route6-ether' 
DEBUG: Result:  
DEBUG: Exit Code: 0 
INFO: Configuring route (gateway settings) for ether. 
INFO: Configuring route 10.192.228.129 
DEBUG: opening file /etc/sysconfig/network-scripts/route-ether for appending. 
DEBUG: opening file /etc/sysconfig/network-scripts/route6-ether for appending. 
INFO: Customizing Hosts file ...  
DEBUG: Old hostname=[alm8-template] 
DEBUG: Old FQDN=[alm8-template] 
DEBUG: New hostname=[alma-host] 
DEBUG: Building FQDN. HostnameFQDN: alma-host, Domainname: xxx.tld 
DEBUG: New FQDN=[alma-host.xxx.tld] 
DEBUG: opening file /etc/hosts. 
DEBUG: Line (inp): 127.0.0.1   localhost localhost.localdomain localhost4 localhost4.localdomain4
 
DEBUG: Line (inp): ::1         localhost localhost.localdomain localhost6 localhost6.localdomain6
 
DEBUG: Static ip entry added 
DEBUG: Line (out): 127.0.0.1   localhost localhost.localdomain localhost4 localhost4.localdomain4
 
DEBUG: Line (out): ::1         localhost localhost.localdomain localhost6 localhost6.localdomain6
 
DEBUG: Line (out): 
10.192.228.58	alma-host.xxx.tld alma-host
 
DEBUG: opening file for writing (/etc/hosts). 
DEBUG: Command: 'chmod 644 /etc/hosts' 
DEBUG: Result:  
DEBUG: Exit Code: 0 
INFO: Customizing DNS ...  
DEBUG: opening file /etc/nsswitch.conf. 
DEBUG: opening file for writing (/etc/nsswitch.conf). 
DEBUG: Command: 'chmod 644 /etc/nsswitch.conf' 
DEBUG: Result:  
DEBUG: Exit Code: 0 
INFO: Query config for ^(DNS\|SUFFIX\|) 
INFO: Query config for ^(DNS\|NAMESERVER\|) 
DEBUG: Match Found : DNS|NAMESERVER|2 
DEBUG: 0 
DEBUG: Match Found : DNS|NAMESERVER|1 
DEBUG: 1 
DEBUG: opening file for writing (/etc/resolv.conf). 
DEBUG: Command: 'chmod 644 /etc/resolv.conf' 
DEBUG: Result:  
DEBUG: Exit Code: 0 
INFO: Check if restorecon exists in /sbin 
DEBUG: Command: '/usr/bin/test -f /sbin/restorecon' 
DEBUG: Result:  
DEBUG: Exit Code: 0 
DEBUG: Command: '/sbin/restorecon /etc/resolv.conf' 
DEBUG: Result:  
DEBUG: Exit Code: 0 
DEBUG: Command: '/sbin/ifconfig -a' 
DEBUG: Result: ens192: flags=4098<BROADCAST,MULTICAST>  mtu 1500
        ether 00:50:56:92:46:40  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

ens224: flags=4098<BROADCAST,MULTICAST>  mtu 1500
        ether 00:50:56:92:17:f7  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 1000  (Local Loopback)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

 
DEBUG: Exit Code: 0 
DEBUG: Command: '/sbin/ifconfig -a' 
DEBUG: Result: ens192: flags=4098<BROADCAST,MULTICAST>  mtu 1500
        ether 00:50:56:92:46:40  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

ens224: flags=4098<BROADCAST,MULTICAST>  mtu 1500
        ether 00:50:56:92:17:f7  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 1000  (Local Loopback)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

 
DEBUG: Exit Code: 0 
DEBUG: Deleting 1 files... 
DEBUG: Deleting /etc/resolv.conf.sv... 
DEBUG: Skipping the delete: file doesn't exist or is a directory 
INFO: Customizing Date&Time ...  
INFO: Marker file exists or is undefined, password settings are not needed 
INFO: Marker file exists or is undefined, post-customization is not needed 
INFO: Marker creation is not needed 
INFO: Customization completed. 
DEBUG: Removing lock file /var/lock/vmware/gosc. 

=================== Perl script log end =================
[2021-05-07T18:49:36.673Z] [    info] Wait before set enable-nics stats in vmx.
[2021-05-07T18:49:36.673Z] [   debug] Trying to connect network interfaces, attempt 1.
[2021-05-07T18:49:36.674Z] [   debug] Got VMX response 'queryNicsSupported'.
[2021-05-07T18:49:38.710Z] [   debug] Got VMX response 'connected'.
[2021-05-07T18:49:38.710Z] [    info] The network interfaces are connected on 0 second.
[2021-05-07T18:49:38.711Z] [    info] Transitioning from state 'INPROGRESS' to state 'Done'.
[2021-05-07T18:49:38.711Z] [    info] ENTER STATE 'Done'.
[2021-05-07T18:49:38.711Z] [    info] EXIT STATE 'INPROGRESS'.
[2021-05-07T18:49:38.711Z] [    info] Deployment succeeded.
[2021-05-07T18:49:38.711Z] [    info] Launching cleanup.
[2021-05-07T18:49:38.711Z] [   debug] Command to exec : '/bin/rm'.
[2021-05-07T18:49:38.711Z] [    info] sizeof ProcessInternal is 56
[2021-05-07T18:49:38.712Z] [    info] Returning, pending output from stdout
[2021-05-07T18:49:38.712Z] [    info] Returning, pending output from stderr
[2021-05-07T18:49:38.812Z] [    info] Process exited normally after 0 seconds, returned 0
[2021-05-07T18:49:38.812Z] [    info] No more output from stdout
[2021-05-07T18:49:38.812Z] [    info] No more output from stderr
[2021-05-07T18:49:38.812Z] [    info] Customization command output:
''.
[2021-05-07T18:49:38.812Z] [    info] sSkipReboot: 'false', forceSkipReboot 'false'.
[2021-05-07T18:49:38.812Z] [   debug] Ran DeployPkg_DeployPackageFromFile successfully
[2021-05-07T18:49:38.812Z] [   debug] ## Closing log
[2021-05-07T18:49:38.813Z] [    info] Trigger reboot.
[2021-05-07T18:49:38.813Z] [   debug] Command to exec : '/sbin/telinit'.
[2021-05-07T18:49:38.813Z] [    info] sizeof ProcessInternal is 56
[2021-05-07T18:49:38.813Z] [    info] Returning, pending output from stdout
[2021-05-07T18:49:38.813Z] [    info] Returning, pending output from stderr
[2021-05-07T18:49:38.888Z] [   error] Process exited abnormally after 0 sec, uncaught signal 15
[2021-05-07T18:49:38.888Z] [    info] No more output from stdout
[2021-05-07T18:49:38.888Z] [    info] No more output from stderr
[2021-05-07T18:49:38.888Z] [    info] Customization command output:
''.
[2021-05-07T18:49:38.888Z] [   error] Customization command failed with exitcode: 127, stderr: ''.
[2021-05-07T18:49:39.888Z] [   error] Failed to reboot, telinit returned error 127.
almalinux-bug-27-centos-8-toolsDeployPkg.log (25,435 bytes)   
[2021-03-24T18:39:35.770Z] [   debug] ## Starting deploy pkg operation
[2021-03-24T18:39:35.770Z] [   debug] Deploying /var/run/11f1a5a8/imcf-R9doph
[2021-03-24T18:39:35.770Z] [    info] Initializing deployment module.

[2021-03-24T18:39:35.770Z] [    info] Cleaning old state files.

[2021-03-24T18:39:35.770Z] [    info] EXIT STATE 'INPROGRESS'.

[2021-03-24T18:39:35.770Z] [   debug] Setting deploy error: 'Error removing lock '/var/log/.vmware-deploy.INPROGRESS'.(No such file or directory)'.

[2021-03-24T18:39:35.770Z] [    info] EXIT STATE 'Done'.

[2021-03-24T18:39:35.770Z] [   debug] Setting deploy error: 'Error removing lock '/var/log/.vmware-deploy.Done'.(No such file or directory)'.

[2021-03-24T18:39:35.770Z] [    info] EXIT STATE 'ERRORED'.

[2021-03-24T18:39:35.770Z] [   debug] Setting deploy error: 'Error removing lock '/var/log/.vmware-deploy.ERRORED'.(No such file or directory)'.

[2021-03-24T18:39:35.770Z] [   debug] Setting deploy error: 'Success.'.

[2021-03-24T18:39:35.770Z] [    info] Deploying cabinet file '/var/run/11f1a5a8/imcf-R9doph'.

[2021-03-24T18:39:35.770Z] [    info] Transitioning from state '(null)' to state 'INPROGRESS'.

[2021-03-24T18:39:35.770Z] [    info] ENTER STATE 'INPROGRESS'.

[2021-03-24T18:39:35.778Z] [    info] Reading cabinet file '/var/run/11f1a5a8/imcf-R9doph' and will extract it to '/var/run/.vmware-imgcust-dXGOCXR'.

[2021-03-24T18:39:35.778Z] [    info] Flags in the header: 0.

[2021-03-24T18:39:35.778Z] [    info] Original deployment command: '/usr/bin/perl -I/tmp/.vmware/linux/deploy/scripts /tmp/.vmware/linux/deploy/scripts/Customize.pl /tmp/.vmware/linux/deploy/cust.cfg'.

[2021-03-24T18:39:35.778Z] [    info] Actual deployment command: '/usr/bin/perl -I/var/run/.vmware-imgcust-dXGOCXR/scripts /var/run/.vmware-imgcust-dXGOCXR/scripts/Customize.pl /var/run/.vmware-imgcust-dXGOCXR/cust.cfg'.

[2021-03-24T18:39:35.778Z] [    info] Extracting package files.

[2021-03-24T18:39:35.833Z] [   debug] Check if cust.cfg exists.

[2021-03-24T18:39:35.833Z] [    info] cust.cfg is found in '/var/run/.vmware-imgcust-dXGOCXR' directory.

[2021-03-24T18:39:35.833Z] [   debug] Command to exec : '/usr/bin/cloud-init'.

[2021-03-24T18:39:35.833Z] [    info] sizeof ProcessInternal is 56

[2021-03-24T18:39:35.833Z] [    info] Returning, pending output from stdout
[2021-03-24T18:39:35.833Z] [    info] Returning, pending output from stderr
[2021-03-24T18:39:35.844Z] [    info] Process exited normally after 0 seconds, returned 127
[2021-03-24T18:39:35.844Z] [    info] No more output from stdout
[2021-03-24T18:39:35.844Z] [    info] No more output from stderr
[2021-03-24T18:39:35.844Z] [    info] Customization command output: ''.

[2021-03-24T18:39:35.844Z] [   error] Customization command failed with exitcode: 127, stderr: ''.

[2021-03-24T18:39:35.844Z] [    info] cloud-init is not installed.

[2021-03-24T18:39:35.844Z] [    info] Executing traditional GOSC workflow.

[2021-03-24T18:39:35.844Z] [   debug] Command to exec : '/usr/bin/perl'.

[2021-03-24T18:39:35.844Z] [    info] sizeof ProcessInternal is 56

[2021-03-24T18:39:35.844Z] [    info] Returning, pending output from stdout
[2021-03-24T18:39:35.844Z] [    info] Returning, pending output from stderr
[2021-03-24T18:39:36.244Z] [    info] Saving output from stdout
[2021-03-24T18:39:36.244Z] [    info] Saving output from stdout
[2021-03-24T18:39:36.244Z] [    info] Saving output from stdout
[2021-03-24T18:39:36.244Z] [    info] Saving output from stdout
[2021-03-24T18:39:36.345Z] [    info] Saving output from stdout
[2021-03-24T18:39:36.345Z] [    info] Saving output from stdout
[2021-03-24T18:39:36.445Z] [    info] Saving output from stdout
[2021-03-24T18:39:36.545Z] [    info] Saving output from stdout
[2021-03-24T18:39:36.645Z] [    info] Saving output from stdout
[2021-03-24T18:39:36.645Z] [    info] Saving output from stdout
[2021-03-24T18:39:36.746Z] [    info] Saving output from stdout
[2021-03-24T18:39:36.746Z] [    info] Saving output from stdout
[2021-03-24T18:39:36.846Z] [    info] Saving output from stdout
[2021-03-24T18:39:36.846Z] [    info] Saving output from stdout
[2021-03-24T18:39:36.846Z] [    info] Saving output from stdout
[2021-03-24T18:39:36.946Z] [    info] Saving output from stdout
[2021-03-24T18:39:36.946Z] [    info] Saving output from stdout
[2021-03-24T18:39:36.946Z] [    info] Saving output from stdout
[2021-03-24T18:39:36.946Z] [    info] Saving output from stdout
[2021-03-24T18:39:37.046Z] [    info] Process exited normally after 1 seconds, returned 0
[2021-03-24T18:39:37.046Z] [    info] Saving output from stdout
[2021-03-24T18:39:37.046Z] [    info] Saving output from stdout
[2021-03-24T18:39:37.046Z] [    info] No more output from stdout
[2021-03-24T18:39:37.046Z] [    info] No more output from stderr
[2021-03-24T18:39:37.046Z] [    info] Customization command output: 'DEBUG: Creating directory /var/lock/vmware 
DEBUG: Opening /var/lock/vmware/gosc in O_CREAT|O_EXCL|O_WRONLY mode 
INFO: Opening file name /var/run/.vmware-imgcust-dXGOCXR/cust.cfg. 
DEBUG: Processing line: '[NETWORK]' 
DEBUG: FOUND CATEGORY = NETWORK 
DEBUG: Processing line: 'NETWORKING = yes' 
DEBUG: ADDED KEY-VAL :: 'NETWORK|NETWORKING' = 'yes' 
DEBUG: Processing line: 'BOOTPROTO = dhcp' 
DEBUG: ADDED KEY-VAL :: 'NETWORK|BOOTPROTO' = 'dhcp' 
DEBUG: Processing line: 'HOSTNAME = centos-hostname' 
DEBUG: ADDED KEY-VAL :: 'NETWORK|HOSTNAME' = 'centos-hostname' 
DEBUG: Processing line: 'DOMAINNAME = xxx.tld' 
DEBUG: ADDED KEY-VAL :: 'NETWORK|DOMAINNAME' = 'xxx.tld' 
DEBUG: Processing line: '' 
DEBUG: Empty line. Ignored. 
DEBUG: Processing line: '[NIC-CONFIG]' 
DEBUG: FOUND CATEGORY = NIC-CONFIG 
DEBUG: Processing line: 'NICS = NIC1,NIC2' 
DEBUG: ADDED KEY-VAL :: 'NIC-CONFIG|NICS' = 'NIC1,NIC2' 
DEBUG: Processing line: '' 
DEBUG: Empty line. Ignored. 
DEBUG: Processing line: '[NIC1]' 
DEBUG: FOUND CATEGORY = NIC1 
DEBUG: Processing line: 'MACADDR = 00:50:56:92:b9:1e' 
DEBUG: ADDED KEY-VAL :: 'NIC1|MACADDR' = '00:50:56:92:b9:1e' 
DEBUG: Processing line: 'PRIMARY = yes' 
DEBUG: ADDED KEY-VAL :: 'NIC1|PRIMARY' = 'yes' 
DEBUG: Processing line: 'ONBOOT = yes' 
DEBUG: ADDED KEY-VAL :: 'NIC1|ONBOOT' = 'yes' 
DEBUG: Processing line: 'IPv4_MODE = BACKWARDS_COMPATIBLE' 
DEBUG: ADDED KEY-VAL :: 'NIC1|IPv4_MODE' = 'BACKWARDS_COMPATIBLE' 
DEBUG: Processing line: 'BOOTPROTO = static' 
DEBUG: ADDED KEY-VAL :: 'NIC1|BOOTPROTO' = 'static' 
DEBUG: Processing line: 'IPADDR = 10.192.233.118' 
DEBUG: ADDED KEY-VAL :: 'NIC1|IPADDR' = '10.192.233.118' 
DEBUG: Processing line: 'NETMASK = 255.255.255.128' 
DEBUG: ADDED KEY-VAL :: 'NIC1|NETMASK' = '255.255.255.128' 
DEBUG: Processing line: 'GATEWAY = 10.192.233.1' 
DEBUG: ADDED KEY-VAL :: 'NIC1|GATEWAY' = '10.192.233.1' 
DEBUG: Processing line: '' 
DEBUG: Empty line. Ignored. 
DEBUG: Processing line: '[NIC2]' 
DEBUG: FOUND CATEGORY = NIC2 
DEBUG: Processing line: 'MACADDR = 00:50:56:92:c4:62' 
DEBUG: ADDED KEY-VAL :: 'NIC2|MACADDR' = '00:50:56:92:c4:62' 
DEBUG: Processing line: 'ONBOOT = yes' 
DEBUG: ADDED KEY-VAL :: 'NIC2|ONBOOT' = 'yes' 
DEBUG: Processing line: 'IPv4_MODE = BACKWARDS_COMPATIBLE' 
DEBUG: ADDED KEY-VAL :: 'NIC2|IPv4_MODE' = 'BACKWARDS_COMPATIBLE' 
DEBUG: Processing line: 'BOOTPROTO = static' 
DEBUG: ADDED KEY-VAL :: 'NIC2|BOOTPROTO' = 'static' 
DEBUG: Processing line: 'IPADDR = 10.192.233.246' 
DEBUG: ADDED KEY-VAL :: 'NIC2|IPADDR' = '10.192.233.246' 
DEBUG: Processing line: 'NETMASK = 255.255.255.128' 
DEBUG: ADDED KEY-VAL :: 'NIC2|NETMASK' = '255.255.255.128' 
DEBUG: Processing line: 'GATEWAY = 10.192.233.129' 
DEBUG: ADDED KEY-VAL :: 'NIC2|GATEWAY' = '10.192.233.129' 
DEBUG: Processing line: '' 
DEBUG: Empty line. Ignored. 
DEBUG: Processing line: '' 
DEBUG: Empty line. Ignored. 
DEBUG: Processing line: '[DNS]' 
DEBUG: FOUND CATEGORY = DNS 
DEBUG: Processing line: 'DNSFROMDHCP=no' 
DEBUG: ADDED KEY-VAL :: 'DNS|DNSFROMDHCP' = 'no' 
DEBUG: Processing line: '' 
DEBUG: Empty line. Ignored. 
DEBUG: Processing line: 'NAMESERVER|1 = 128.100.100.128' 
DEBUG: ADDED KEY-VAL :: 'DNS|NAMESERVER|1' = '128.100.100.128' 
DEBUG: Processing line: 'NAMESERVER|2 = 128.100.96.34' 
DEBUG: ADDED KEY-VAL :: 'DNS|NAMESERVER|2' = '128.100.96.34' 
DEBUG: Reading issue file ...  
DEBUG: Command: 'cat /etc/issue' 
DEBUG: Result: \S
Kernel \r on an \m

 
DEBUG: Exit Code: 0 
DEBUG: \S
Kernel \r on an \m

 
DEBUG: Reading issue file ...  
DEBUG: Command: 'cat /etc/issue' 
DEBUG: Result: \S
Kernel \r on an \m

 
DEBUG: Exit Code: 0 
DEBUG: \S
Kernel \r on an \m

 
DEBUG: Reading /etc/os-release file ...  
DEBUG: opening file /etc/os-release. 
DEBUG: Match found   : Line = ID="centos"
 
DEBUG: Actual String : "centos" 
DEBUG: ID: "centos" 
DEBUG: opening file /etc/os-release. 
DEBUG: Match found   : Line = VERSION_ID="8"
 
DEBUG: Actual String : "8" 
DEBUG: Version: "8" 
WARNING: Amazon Linux flavor not detected 
DEBUG: Reading issue file ...  
DEBUG: Command: 'cat /etc/issue' 
DEBUG: Result: \S
Kernel \r on an \m

 
DEBUG: Exit Code: 0 
DEBUG: \S
Kernel \r on an \m

 
DEBUG: Reading redhat-release file ...  
DEBUG: Command: 'cat /etc/redhat-release' 
DEBUG: Result: CentOS Linux release 8.3.2011
 
DEBUG: Exit Code: 0 
DEBUG: CentOS Linux release 8.3.2011
 
DEBUG: Detected flavor: 'CentOS 8' 
INFO: Detected distribution: CentOS 8 
DEBUG: Reading issue file ...  
DEBUG: Command: 'cat /etc/issue' 
DEBUG: Result: \S
Kernel \r on an \m

 
DEBUG: Exit Code: 0 
DEBUG: \S
Kernel \r on an \m

 
DEBUG: Reading redhat-release file ...  
DEBUG: Command: 'cat /etc/redhat-release' 
DEBUG: Result: CentOS Linux release 8.3.2011
 
DEBUG: Exit Code: 0 
DEBUG: CentOS Linux release 8.3.2011
 
DEBUG: Detected flavor: 'CentOS 8' 
INFO: Detected distribution flavour: CentOS 8 
INFO: Customization instance RHEL7Customization loaded. 
INFO: Customization started 
DEBUG: Command: 'hostname 2>/dev/null' 
DEBUG: Result: localhost
 
DEBUG: Exit Code: 0 
DEBUG: TimedCommand: 'hostname -f 2>/dev/null' with timeout of 5 sec 
DEBUG: Fetching result from /tmp/timed_out_tmp_file_988 
DEBUG: TimedResult: localhost
 
INFO: OLD HOST NAME = localhost 
INFO: Marker file exists or is undefined, pre-customization is not needed 
INFO: Customizing Network settings ...  
DEBUG: opening file /etc/sysconfig/network-scripts/ifcfg-ens160. 
DEBUG: DHCPV6C is '' 
DEBUG: opening file /etc/sysconfig/network-scripts/ifcfg-ens160. 
DEBUG: DHCPV6C_OPTIONS is '' 
DEBUG: opening file /etc/sysconfig/network-scripts/ifcfg-ens160. 
DEBUG: IPV6_AUTOCONF is '' 
DEBUG: opening file /etc/sysconfig/network-scripts/ifcfg-ens160. 
DEBUG: IPV6INIT is '' 
INFO: Removing old interface configuration files. 
DEBUG: Command: 'rm -f /etc/sysconfig/network-scripts/ifcfg-eth*' 
DEBUG: Result:  
DEBUG: Exit Code: 0 
INFO: Erasing DHCP leases 
DEBUG: Command: 'pkill dhclient' 
DEBUG: Result:  
DEBUG: Exit Code: 256 
DEBUG: Command: 'rm -f /var/lib/dhcp/*' 
DEBUG: Result:  
DEBUG: Exit Code: 0 
DEBUG: Command: 'rm -f /var/lib/dhclient/*' 
DEBUG: Result:  
DEBUG: Exit Code: 0 
INFO: Resetting Network Administration Tool (redhat-config-network) 
DEBUG: Command: 'rm -rf /etc/sysconfig/networking/devices' 
DEBUG: Result:  
DEBUG: Exit Code: 0 
DEBUG: Command: 'rm -rf /etc/sysconfig/networking/profiles' 
DEBUG: Result:  
DEBUG: Exit Code: 0 
INFO: Primary NIC is 00:50:56:92:b9:1e 
DEBUG: Command: 'whereis ip' 
DEBUG: Result: ip: /usr/sbin/ip /usr/share/man/man7/ip.7.gz /usr/share/man/man8/ip.8.gz
 
DEBUG: Exit Code: 0 
DEBUG: Command: '/usr/sbin/ip addr show' 
DEBUG: Result: 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
2: ens160: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
    link/ether 00:50:56:92:b9:1e brd ff:ff:ff:ff:ff:ff
3: ens224: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
    link/ether 00:50:56:92:c4:62 brd ff:ff:ff:ff:ff:ff
 
DEBUG: Exit Code: 0 
DEBUG: opening file /etc/sysconfig/network. 
DEBUG: Line : # Created by anaconda
 
DEBUG: Line : 
 
DEBUG: Line : NETWORKING=yes
 
DEBUG: Line : GATEWAY=142.150.183.129
 
INFO: Found GATEWAY 
INFO: Patched with 10.192.233.1 
INFO: GATEWAYDEV not found, created with ens160 
DEBUG: opening file for writing (/etc/sysconfig/network). 
DEBUG: Command: 'chmod 644 /etc/sysconfig/network' 
DEBUG: Result:  
DEBUG: Exit Code: 0 
DEBUG: Command: 'hostname centos-hostname' 
DEBUG: Result:  
DEBUG: Exit Code: 0 
DEBUG: opening file for writing (/etc/hostname). 
DEBUG: Command: 'chmod 644 /etc/hostname' 
DEBUG: Result:  
DEBUG: Exit Code: 0 
INFO: Customizing NICS ...  
DEBUG: Command: 'modprobe pcnet32 2> /dev/null' 
DEBUG: Result:  
DEBUG: Exit Code: 256 
DEBUG: Command: '/sbin/ifconfig eth0 2> /dev/null' 
DEBUG: Result:  
DEBUG: Exit Code: 256 
INFO: Customizing NICS. { NIC1,NIC2 } 
INFO: Customizing NIC NIC1 
DEBUG: Command: 'whereis ip' 
DEBUG: Result: ip: /usr/sbin/ip /usr/share/man/man7/ip.7.gz /usr/share/man/man8/ip.8.gz
 
DEBUG: Exit Code: 0 
DEBUG: Command: '/usr/sbin/ip addr show' 
DEBUG: Result: 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
2: ens160: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
    link/ether 00:50:56:92:b9:1e brd ff:ff:ff:ff:ff:ff
3: ens224: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
    link/ether 00:50:56:92:c4:62 brd ff:ff:ff:ff:ff:ff
 
DEBUG: Exit Code: 0 
DEBUG: Deleting 0 files... 
DEBUG: Command: 'whereis ip' 
DEBUG: Result: ip: /usr/sbin/ip /usr/share/man/man7/ip.7.gz /usr/share/man/man8/ip.8.gz
 
DEBUG: Exit Code: 0 
DEBUG: Command: '/usr/sbin/ip addr show' 
DEBUG: Result: 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
2: ens160: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
    link/ether 00:50:56:92:b9:1e brd ff:ff:ff:ff:ff:ff
3: ens224: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
    link/ether 00:50:56:92:c4:62 brd ff:ff:ff:ff:ff:ff
 
DEBUG: Exit Code: 0 
INFO: Writing ifcfg file for NIC suffix = ens160 
INFO: Query config for ^(DNS\|NAMESERVER\|) 
DEBUG: Match Found : DNS|NAMESERVER|2 
DEBUG: 0 
DEBUG: Match Found : DNS|NAMESERVER|1 
DEBUG: 1 
INFO: Query config for ^(DNS\|SUFFIX\|) 
INFO: Query config for ^NIC1(\|IPv6GATEWAY\|) 
INFO: Query config for ^(NIC1\|IPv6ADDR\|) 
INFO: Query config for ^(NIC1\|IPv6NETMASK\|) 
DEBUG: Command: 'whereis ip' 
DEBUG: Result: ip: /usr/sbin/ip /usr/share/man/man7/ip.7.gz /usr/share/man/man8/ip.8.gz
 
DEBUG: Exit Code: 0 
DEBUG: Command: '/usr/sbin/ip addr show' 
DEBUG: Result: 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
2: ens160: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
    link/ether 00:50:56:92:b9:1e brd ff:ff:ff:ff:ff:ff
3: ens224: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
    link/ether 00:50:56:92:c4:62 brd ff:ff:ff:ff:ff:ff
 
DEBUG: Exit Code: 0 
DEBUG: opening file for writing (/etc/sysconfig/network-scripts/ifcfg-ens160). 
DEBUG: Command: 'chmod 644 /etc/sysconfig/network-scripts/ifcfg-ens160' 
DEBUG: Result:  
DEBUG: Exit Code: 0 
INFO: Query config for ^NIC1(\|IPv6GATEWAY\|) 
INFO: Customizing NIC NIC2 
DEBUG: Command: 'whereis ip' 
DEBUG: Result: ip: /usr/sbin/ip /usr/share/man/man7/ip.7.gz /usr/share/man/man8/ip.8.gz
 
DEBUG: Exit Code: 0 
DEBUG: Command: '/usr/sbin/ip addr show' 
DEBUG: Result: 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
2: ens160: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
    link/ether 00:50:56:92:b9:1e brd ff:ff:ff:ff:ff:ff
3: ens224: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
    link/ether 00:50:56:92:c4:62 brd ff:ff:ff:ff:ff:ff
 
DEBUG: Exit Code: 0 
DEBUG: Deleting 0 files... 
DEBUG: Command: 'whereis ip' 
DEBUG: Result: ip: /usr/sbin/ip /usr/share/man/man7/ip.7.gz /usr/share/man/man8/ip.8.gz
 
DEBUG: Exit Code: 0 
DEBUG: Command: '/usr/sbin/ip addr show' 
DEBUG: Result: 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
2: ens160: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
    link/ether 00:50:56:92:b9:1e brd ff:ff:ff:ff:ff:ff
3: ens224: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
    link/ether 00:50:56:92:c4:62 brd ff:ff:ff:ff:ff:ff
 
DEBUG: Exit Code: 0 
INFO: Writing ifcfg file for NIC suffix = ens224 
INFO: Query config for ^(DNS\|NAMESERVER\|) 
DEBUG: Match Found : DNS|NAMESERVER|2 
DEBUG: 0 
DEBUG: Match Found : DNS|NAMESERVER|1 
DEBUG: 1 
INFO: Query config for ^(DNS\|SUFFIX\|) 
INFO: Query config for ^NIC2(\|IPv6GATEWAY\|) 
INFO: Query config for ^(NIC2\|IPv6ADDR\|) 
INFO: Query config for ^(NIC2\|IPv6NETMASK\|) 
DEBUG: Command: 'whereis ip' 
DEBUG: Result: ip: /usr/sbin/ip /usr/share/man/man7/ip.7.gz /usr/share/man/man8/ip.8.gz
 
DEBUG: Exit Code: 0 
DEBUG: Command: '/usr/sbin/ip addr show' 
DEBUG: Result: 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
2: ens160: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
    link/ether 00:50:56:92:b9:1e brd ff:ff:ff:ff:ff:ff
3: ens224: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
    link/ether 00:50:56:92:c4:62 brd ff:ff:ff:ff:ff:ff
 
DEBUG: Exit Code: 0 
DEBUG: opening file for writing (/etc/sysconfig/network-scripts/ifcfg-ens224). 
DEBUG: Command: 'chmod 644 /etc/sysconfig/network-scripts/ifcfg-ens224' 
DEBUG: Result:  
DEBUG: Exit Code: 0 
INFO: Query config for ^NIC2(\|IPv6GATEWAY\|) 
INFO: Customizing Hosts file ...  
DEBUG: Old hostname=[localhost] 
DEBUG: Old FQDN=[localhost] 
DEBUG: New hostname=[centos-hostname] 
DEBUG: Building FQDN. HostnameFQDN: centos-hostname, Domainname: xxx.tld 
DEBUG: New FQDN=[centos-hostname.xxx.tld] 
DEBUG: opening file /etc/hosts. 
DEBUG: Line (inp): 127.0.0.1   localhost localhost.localdomain localhost4 localhost4.localdomain4
 
DEBUG: Line (inp): ::1         localhost localhost.localdomain localhost6 localhost6.localdomain6
 
DEBUG: Line (inp): 10.192.212.46   puppet
 
DEBUG: Static ip entry added 
DEBUG: Line (out): 127.0.0.1   localhost localhost.localdomain localhost4 localhost4.localdomain4
 
DEBUG: Line (out): ::1         localhost localhost.localdomain localhost6 localhost6.localdomain6
 
DEBUG: Line (out): 10.192.212.46   puppet
 
DEBUG: Line (out): 
10.192.233.118	centos-hostname.xxx.tld centos-hostname
 
DEBUG: opening file for writing (/etc/hosts). 
DEBUG: Command: 'chmod 644 /etc/hosts' 
DEBUG: Result:  
DEBUG: Exit Code: 0 
INFO: Customizing DNS ...  
DEBUG: opening file /etc/nsswitch.conf. 
DEBUG: opening file for writing (/etc/nsswitch.conf). 
DEBUG: Command: 'chmod 644 /etc/nsswitch.conf' 
DEBUG: Result:  
DEBUG: Exit Code: 0 
INFO: Query config for ^(DNS\|SUFFIX\|) 
INFO: Query config for ^(DNS\|NAMESERVER\|) 
DEBUG: Match Found : DNS|NAMESERVER|2 
DEBUG: 0 
DEBUG: Match Found : DNS|NAMESERVER|1 
DEBUG: 1 
DEBUG: opening file for writing (/etc/resolv.conf). 
DEBUG: Command: 'chmod 644 /etc/resolv.conf' 
DEBUG: Result:  
DEBUG: Exit Code: 0 
INFO: Check if restorecon exists in /sbin 
DEBUG: Command: '/usr/bin/test -f /sbin/restorecon' 
DEBUG: Result:  
DEBUG: Exit Code: 0 
DEBUG: Command: '/sbin/restorecon /etc/resolv.conf' 
DEBUG: Result:  
DEBUG: Exit Code: 0 
DEBUG: Command: 'whereis ip' 
DEBUG: Result: ip: /usr/sbin/ip /usr/share/man/man7/ip.7.gz /usr/share/man/man8/ip.8.gz
 
DEBUG: Exit Code: 0 
DEBUG: Command: '/usr/sbin/ip addr show' 
DEBUG: Result: 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
2: ens160: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
    link/ether 00:50:56:92:b9:1e brd ff:ff:ff:ff:ff:ff
3: ens224: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
    link/ether 00:50:56:92:c4:62 brd ff:ff:ff:ff:ff:ff
 
DEBUG: Exit Code: 0 
INFO: Query config for ^(DNS\|SUFFIX\|) 
INFO: Query config for ^(DNS\|NAMESERVER\|) 
DEBUG: Match Found : DNS|NAMESERVER|2 
DEBUG: 0 
DEBUG: Match Found : DNS|NAMESERVER|1 
DEBUG: 1 
DEBUG: opening file for writing (/etc/dhclient-ens160.conf). 
DEBUG: Command: 'chmod 644 /etc/dhclient-ens160.conf' 
DEBUG: Result:  
DEBUG: Exit Code: 0 
DEBUG: Command: 'whereis ip' 
DEBUG: Result: ip: /usr/sbin/ip /usr/share/man/man7/ip.7.gz /usr/share/man/man8/ip.8.gz
 
DEBUG: Exit Code: 0 
DEBUG: Command: '/usr/sbin/ip addr show' 
DEBUG: Result: 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
2: ens160: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
    link/ether 00:50:56:92:b9:1e brd ff:ff:ff:ff:ff:ff
3: ens224: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
    link/ether 00:50:56:92:c4:62 brd ff:ff:ff:ff:ff:ff
 
DEBUG: Exit Code: 0 
INFO: Query config for ^(DNS\|SUFFIX\|) 
INFO: Query config for ^(DNS\|NAMESERVER\|) 
DEBUG: Match Found : DNS|NAMESERVER|2 
DEBUG: 0 
DEBUG: Match Found : DNS|NAMESERVER|1 
DEBUG: 1 
DEBUG: opening file for writing (/etc/dhclient-ens224.conf). 
DEBUG: Command: 'chmod 644 /etc/dhclient-ens224.conf' 
DEBUG: Result:  
DEBUG: Exit Code: 0 
DEBUG: Deleting 1 files... 
DEBUG: Deleting /etc/resolv.conf.sv... 
DEBUG: Skipping the delete: file doesn't exist or is a directory 
INFO: Customizing Date&Time ...  
INFO: Marker file exists or is undefined, password settings are not needed 
INFO: Marker file exists or is undefined, post-customization is not needed 
INFO: Marker creation is not needed 
INFO: Customization completed. 
DEBUG: Removing lock file /var/lock/vmware/gosc. 
'.

[2021-03-24T18:39:42.047Z] [    info] Wait before set enable-nics stats in vmx.

[2021-03-24T18:39:42.047Z] [   debug] Trying to connect network interfaces, attempt 1.

[2021-03-24T18:39:42.048Z] [   debug] Got VMX response 'queryNicsSupported'.

[2021-03-24T18:39:44.079Z] [   debug] Got VMX response 'connected'.

[2021-03-24T18:39:44.079Z] [    info] The network interfaces are connected on 0 second.

[2021-03-24T18:39:44.081Z] [    info] Transitioning from state 'INPROGRESS' to state 'Done'.

[2021-03-24T18:39:44.081Z] [    info] ENTER STATE 'Done'.

[2021-03-24T18:39:44.081Z] [    info] EXIT STATE 'INPROGRESS'.

[2021-03-24T18:39:44.081Z] [    info] Deployment succeeded.

[2021-03-24T18:39:44.081Z] [    info] Launching cleanup.

[2021-03-24T18:39:44.081Z] [   debug] Command to exec : '/bin/rm'.

[2021-03-24T18:39:44.081Z] [    info] sizeof ProcessInternal is 56

[2021-03-24T18:39:44.082Z] [    info] Returning, pending output from stdout
[2021-03-24T18:39:44.082Z] [    info] Returning, pending output from stderr
[2021-03-24T18:39:44.182Z] [    info] Process exited normally after 0 seconds, returned 0
[2021-03-24T18:39:44.182Z] [    info] No more output from stdout
[2021-03-24T18:39:44.182Z] [    info] No more output from stderr
[2021-03-24T18:39:44.182Z] [    info] Customization command output: ''.

[2021-03-24T18:39:44.182Z] [    info] sSkipReboot: 'false', forceSkipReboot 'false'.

[2021-03-24T18:39:44.183Z] [   debug] Ran DeployPkg_DeployPackageFromFile successfully
[2021-03-24T18:39:44.183Z] [   debug] ## Closing log
[2021-03-24T18:39:44.183Z] [    info] Trigger reboot.

[2021-03-24T18:39:44.183Z] [   debug] Command to exec : '/sbin/telinit'.

[2021-03-24T18:39:44.183Z] [    info] sizeof ProcessInternal is 56

[2021-03-24T18:39:44.183Z] [    info] Returning, pending output from stdout
[2021-03-24T18:39:44.183Z] [    info] Returning, pending output from stderr
[2021-03-24T18:39:44.241Z] [   error] Process exited abnormally after 0 sec, uncaught signal 15
[2021-03-24T18:39:44.241Z] [    info] No more output from stdout
[2021-03-24T18:39:44.241Z] [    info] No more output from stderr
[2021-03-24T18:39:44.241Z] [    info] Customization command output: ''.

[2021-03-24T18:39:44.241Z] [   error] Customization command failed with exitcode: 127, stderr: ''.

[2021-03-24T18:39:45.241Z] [   error] Failed to reboot, telinit returned error 127.

alukoshko

2021-05-07 20:47

administrator   ~0000184

Last edited: 2021-05-07 20:49

Well I see the difference:

CentOS:
INFO: Customization instance RHEL7Customization loaded.

AlmaLinux:
INFO: Customization instance RedHatCustomization loaded.

Errors at the end of logs actually the same for both OS.

alukoshko

2021-05-07 21:13

administrator   ~0000185

alukoshko

2021-05-07 21:13

administrator   ~0000186

alukoshko

2021-05-07 21:16

administrator   ~0000187

Attached files are for 8.3 stable actually but may work on 8.4 beta too I believe.
Please attach log even if customization will fail again as I wanna check the difference.

corporategadfly

2021-05-13 01:46

reporter   ~0000191

Here is the procedure to create a new template VM from 8.3 stable. After installing 8.3 AlmaLinux, I executed the following commands:

yum remove open-vm-tools --noautoremove
rpm -ivh /tmp/open-vm-tools-11.1.0-2.el8.alma.x86_64.rpm

Installed perl:

yum install perl

After that shutdown VM and converted VM to template. Then, I used this template to create a new VM with multiple NICs. Find attached the toolsDeployPkg.log (Same detection of RedHat family as earlier - no difference).
almalinux-bug-27-almalinux-8.3-with-patched-open-vm-tools-failed-toolsDeployPkg.log (29,622 bytes)   
[2021-05-13T01:15:58.320Z] [   debug] ## Starting deploy pkg operation
[2021-05-13T01:15:58.320Z] [   debug] Deploying /var/run/0b3084f5/imcf-DC86Ss
[2021-05-13T01:15:58.320Z] [    info] Initializing deployment module.

[2021-05-13T01:15:58.320Z] [    info] Cleaning old state files.

[2021-05-13T01:15:58.320Z] [    info] EXIT STATE 'INPROGRESS'.

[2021-05-13T01:15:58.320Z] [   debug] Setting deploy error: 'Error removing lock '/var/log/.vmware-deploy.INPROGRESS'.(No such file or directory)'.

[2021-05-13T01:15:58.320Z] [    info] EXIT STATE 'Done'.

[2021-05-13T01:15:58.320Z] [   debug] Setting deploy error: 'Error removing lock '/var/log/.vmware-deploy.Done'.(No such file or directory)'.

[2021-05-13T01:15:58.320Z] [    info] EXIT STATE 'ERRORED'.

[2021-05-13T01:15:58.320Z] [   debug] Setting deploy error: 'Error removing lock '/var/log/.vmware-deploy.ERRORED'.(No such file or directory)'.

[2021-05-13T01:15:58.320Z] [   debug] Setting deploy error: 'Success.'.

[2021-05-13T01:15:58.320Z] [    info] Deploying cabinet file '/var/run/0b3084f5/imcf-DC86Ss'.

[2021-05-13T01:15:58.320Z] [    info] Transitioning from state '(null)' to state 'INPROGRESS'.

[2021-05-13T01:15:58.320Z] [    info] ENTER STATE 'INPROGRESS'.

[2021-05-13T01:15:58.322Z] [    info] Reading cabinet file '/var/run/0b3084f5/imcf-DC86Ss' and will extract it to '/var/run/.vmware-imgcust-dpa55Fi'.

[2021-05-13T01:15:58.322Z] [    info] Flags in the header: 0.

[2021-05-13T01:15:58.322Z] [    info] Original deployment command: '/usr/bin/perl -I/tmp/.vmware/linux/deploy/scripts /tmp/.vmware/linux/deploy/scripts/Customize.pl /tmp/.vmware/linux/deploy/cust.cfg'.

[2021-05-13T01:15:58.322Z] [    info] Actual deployment command: '/usr/bin/perl -I/var/run/.vmware-imgcust-dpa55Fi/scripts /var/run/.vmware-imgcust-dpa55Fi/scripts/Customize.pl /var/run/.vmware-imgcust-dpa55Fi/cust.cfg'.

[2021-05-13T01:15:58.322Z] [    info] Extracting package files.

[2021-05-13T01:15:58.448Z] [   debug] Check if cust.cfg exists.

[2021-05-13T01:15:58.448Z] [    info] cust.cfg is found in '/var/run/.vmware-imgcust-dpa55Fi' directory.

[2021-05-13T01:15:58.448Z] [   debug] Command to exec : '/usr/bin/cloud-init'.

[2021-05-13T01:15:58.448Z] [    info] sizeof ProcessInternal is 56

[2021-05-13T01:15:58.455Z] [    info] Returning, pending output from stdout
[2021-05-13T01:15:58.455Z] [    info] Returning, pending output from stderr
[2021-05-13T01:15:58.555Z] [    info] Process exited normally after 0 seconds, returned 127
[2021-05-13T01:15:58.555Z] [    info] No more output from stdout
[2021-05-13T01:15:58.555Z] [    info] No more output from stderr
[2021-05-13T01:15:58.555Z] [    info] Customization command output: ''.

[2021-05-13T01:15:58.555Z] [   error] Customization command failed with exitcode: 127, stderr: ''.

[2021-05-13T01:15:58.555Z] [    info] cloud-init is not installed.

[2021-05-13T01:15:58.555Z] [    info] Executing traditional GOSC workflow.

[2021-05-13T01:15:58.555Z] [   debug] Command to exec : '/usr/bin/perl'.

[2021-05-13T01:15:58.555Z] [    info] sizeof ProcessInternal is 56

[2021-05-13T01:15:58.555Z] [    info] Returning, pending output from stdout
[2021-05-13T01:15:58.555Z] [    info] Returning, pending output from stderr
[2021-05-13T01:15:59.056Z] [    info] Saving output from stdout
[2021-05-13T01:15:59.056Z] [    info] Saving output from stdout
[2021-05-13T01:15:59.056Z] [    info] Saving output from stdout
[2021-05-13T01:15:59.056Z] [    info] Saving output from stdout
[2021-05-13T01:15:59.056Z] [    info] Saving output from stdout
[2021-05-13T01:15:59.056Z] [    info] Saving output from stdout
[2021-05-13T01:15:59.156Z] [    info] Saving output from stdout
[2021-05-13T01:15:59.156Z] [    info] Saving output from stdout
[2021-05-13T01:15:59.156Z] [    info] Saving output from stdout
[2021-05-13T01:15:59.256Z] [    info] Saving output from stdout
[2021-05-13T01:15:59.256Z] [    info] Saving output from stdout
[2021-05-13T01:15:59.256Z] [    info] Saving output from stdout
[2021-05-13T01:15:59.256Z] [    info] Saving output from stdout
[2021-05-13T01:15:59.256Z] [    info] Saving output from stdout
[2021-05-13T01:15:59.256Z] [    info] Saving output from stdout
[2021-05-13T01:15:59.256Z] [    info] Saving output from stdout
[2021-05-13T01:15:59.256Z] [    info] Saving output from stdout
[2021-05-13T01:15:59.356Z] [    info] Saving output from stdout
[2021-05-13T01:15:59.356Z] [    info] Saving output from stdout
[2021-05-13T01:15:59.356Z] [    info] Saving output from stdout
[2021-05-13T01:15:59.356Z] [    info] Saving output from stdout
[2021-05-13T01:15:59.356Z] [    info] Saving output from stdout
[2021-05-13T01:15:59.456Z] [    info] Process exited normally after 0 seconds, returned 0
[2021-05-13T01:15:59.456Z] [    info] Saving output from stdout
[2021-05-13T01:15:59.456Z] [    info] Saving output from stdout
[2021-05-13T01:15:59.456Z] [    info] No more output from stdout
[2021-05-13T01:15:59.456Z] [    info] No more output from stderr
[2021-05-13T01:15:59.456Z] [    info] Customization command output: 'DEBUG: Creating directory /var/lock/vmware 
DEBUG: Opening /var/lock/vmware/gosc in O_CREAT|O_EXCL|O_WRONLY mode 
INFO: Opening file name /var/run/.vmware-imgcust-dpa55Fi/cust.cfg. 
DEBUG: Processing line: '[NETWORK]' 
DEBUG: FOUND CATEGORY = NETWORK 
DEBUG: Processing line: 'NETWORKING = yes' 
DEBUG: ADDED KEY-VAL :: 'NETWORK|NETWORKING' = 'yes' 
DEBUG: Processing line: 'BOOTPROTO = dhcp' 
DEBUG: ADDED KEY-VAL :: 'NETWORK|BOOTPROTO' = 'dhcp' 
DEBUG: Processing line: 'HOSTNAME = alma-8-newhostname' 
DEBUG: ADDED KEY-VAL :: 'NETWORK|HOSTNAME' = 'alma-8-newhostname' 
DEBUG: Processing line: 'DOMAINNAME = tld.xxx' 
DEBUG: ADDED KEY-VAL :: 'NETWORK|DOMAINNAME' = 'tld.xxx' 
DEBUG: Processing line: '' 
DEBUG: Empty line. Ignored. 
DEBUG: Processing line: '[NIC-CONFIG]' 
DEBUG: FOUND CATEGORY = NIC-CONFIG 
DEBUG: Processing line: 'NICS = NIC1,NIC2' 
DEBUG: ADDED KEY-VAL :: 'NIC-CONFIG|NICS' = 'NIC1,NIC2' 
DEBUG: Processing line: '' 
DEBUG: Empty line. Ignored. 
DEBUG: Processing line: '[NIC1]' 
DEBUG: FOUND CATEGORY = NIC1 
DEBUG: Processing line: 'MACADDR = 00:50:56:92:a2:6e' 
DEBUG: ADDED KEY-VAL :: 'NIC1|MACADDR' = '00:50:56:92:a2:6e' 
DEBUG: Processing line: 'PRIMARY = yes' 
DEBUG: ADDED KEY-VAL :: 'NIC1|PRIMARY' = 'yes' 
DEBUG: Processing line: 'ONBOOT = yes' 
DEBUG: ADDED KEY-VAL :: 'NIC1|ONBOOT' = 'yes' 
DEBUG: Processing line: 'IPv4_MODE = BACKWARDS_COMPATIBLE' 
DEBUG: ADDED KEY-VAL :: 'NIC1|IPv4_MODE' = 'BACKWARDS_COMPATIBLE' 
DEBUG: Processing line: 'BOOTPROTO = static' 
DEBUG: ADDED KEY-VAL :: 'NIC1|BOOTPROTO' = 'static' 
DEBUG: Processing line: 'IPADDR = 10.192.228.58' 
DEBUG: ADDED KEY-VAL :: 'NIC1|IPADDR' = '10.192.228.58' 
DEBUG: Processing line: 'NETMASK = 255.255.255.128' 
DEBUG: ADDED KEY-VAL :: 'NIC1|NETMASK' = '255.255.255.128' 
DEBUG: Processing line: 'GATEWAY = 10.192.228.1' 
DEBUG: ADDED KEY-VAL :: 'NIC1|GATEWAY' = '10.192.228.1' 
DEBUG: Processing line: '' 
DEBUG: Empty line. Ignored. 
DEBUG: Processing line: '[NIC2]' 
DEBUG: FOUND CATEGORY = NIC2 
DEBUG: Processing line: 'MACADDR = 00:50:56:92:9a:1f' 
DEBUG: ADDED KEY-VAL :: 'NIC2|MACADDR' = '00:50:56:92:9a:1f' 
DEBUG: Processing line: 'ONBOOT = yes' 
DEBUG: ADDED KEY-VAL :: 'NIC2|ONBOOT' = 'yes' 
DEBUG: Processing line: 'IPv4_MODE = BACKWARDS_COMPATIBLE' 
DEBUG: ADDED KEY-VAL :: 'NIC2|IPv4_MODE' = 'BACKWARDS_COMPATIBLE' 
DEBUG: Processing line: 'BOOTPROTO = static' 
DEBUG: ADDED KEY-VAL :: 'NIC2|BOOTPROTO' = 'static' 
DEBUG: Processing line: 'IPADDR = 10.192.228.186' 
DEBUG: ADDED KEY-VAL :: 'NIC2|IPADDR' = '10.192.228.186' 
DEBUG: Processing line: 'NETMASK = 255.255.255.128' 
DEBUG: ADDED KEY-VAL :: 'NIC2|NETMASK' = '255.255.255.128' 
DEBUG: Processing line: 'GATEWAY = 10.192.228.129' 
DEBUG: ADDED KEY-VAL :: 'NIC2|GATEWAY' = '10.192.228.129' 
DEBUG: Processing line: '' 
DEBUG: Empty line. Ignored. 
DEBUG: Processing line: '' 
DEBUG: Empty line. Ignored. 
DEBUG: Processing line: '[DNS]' 
DEBUG: FOUND CATEGORY = DNS 
DEBUG: Processing line: 'DNSFROMDHCP=no' 
DEBUG: ADDED KEY-VAL :: 'DNS|DNSFROMDHCP' = 'no' 
DEBUG: Processing line: '' 
DEBUG: Empty line. Ignored. 
DEBUG: Processing line: 'NAMESERVER|1 = 128.100.100.128' 
DEBUG: ADDED KEY-VAL :: 'DNS|NAMESERVER|1' = '128.100.100.128' 
DEBUG: Processing line: 'NAMESERVER|2 = 128.100.96.34' 
DEBUG: ADDED KEY-VAL :: 'DNS|NAMESERVER|2' = '128.100.96.34' 
DEBUG: Reading issue file ...  
DEBUG: Command: 'cat /etc/issue' 
DEBUG: Result: \S
Kernel \r on an \m

 
DEBUG: Exit Code: 0 
DEBUG: \S
Kernel \r on an \m

 
DEBUG: Reading issue file ...  
DEBUG: Command: 'cat /etc/issue' 
DEBUG: Result: \S
Kernel \r on an \m

 
DEBUG: Exit Code: 0 
DEBUG: \S
Kernel \r on an \m

 
DEBUG: Reading /etc/os-release file ...  
DEBUG: opening file /etc/os-release. 
DEBUG: Match found   : Line = ID="almalinux"
 
DEBUG: Actual String : "almalinux" 
DEBUG: ID: "almalinux" 
DEBUG: opening file /etc/os-release. 
DEBUG: Match found   : Line = VERSION_ID="8.3"
 
DEBUG: Actual String : "8.3" 
DEBUG: Version: "8.3" 
WARNING: Amazon Linux flavor not detected 
DEBUG: Reading issue file ...  
DEBUG: Command: 'cat /etc/issue' 
DEBUG: Result: \S
Kernel \r on an \m

 
DEBUG: Exit Code: 0 
DEBUG: \S
Kernel \r on an \m

 
DEBUG: Reading redhat-release file ...  
DEBUG: Command: 'cat /etc/redhat-release' 
DEBUG: Result: AlmaLinux release 8.3 (Purple Manul)
 
DEBUG: Exit Code: 0 
DEBUG: AlmaLinux release 8.3 (Purple Manul)
 
WARNING: Redhat flavor not detected 
DEBUG: Reading issue file ...  
DEBUG: Command: 'cat /etc/issue' 
DEBUG: Result: \S
Kernel \r on an \m

 
DEBUG: Exit Code: 0 
DEBUG: \S
Kernel \r on an \m

 
DEBUG: Reading redhat-release file ...  
DEBUG: Command: 'cat /etc/redhat-release' 
DEBUG: Result: AlmaLinux release 8.3 (Purple Manul)
 
DEBUG: Exit Code: 0 
DEBUG: AlmaLinux release 8.3 (Purple Manul)
 
WARNING: Redhat flavor not detected 
INFO: Detected distribution: RedHat Linux Distribution 
DEBUG: Reading issue file ...  
DEBUG: Command: 'cat /etc/issue' 
DEBUG: Result: \S
Kernel \r on an \m

 
DEBUG: Exit Code: 0 
DEBUG: \S
Kernel \r on an \m

 
DEBUG: Reading redhat-release file ...  
DEBUG: Command: 'cat /etc/redhat-release' 
DEBUG: Result: AlmaLinux release 8.3 (Purple Manul)
 
DEBUG: Exit Code: 0 
DEBUG: AlmaLinux release 8.3 (Purple Manul)
 
WARNING: Redhat flavor not detected 
WARNING: Unknown RedHat Linux Distribution distribution flavour. 
INFO: Customization instance RedHatCustomization loaded. 
INFO: Customization started 
DEBUG: Command: 'hostname 2>/dev/null' 
DEBUG: Result: alma-8-template
 
DEBUG: Exit Code: 0 
DEBUG: TimedCommand: 'hostname -f 2>/dev/null' with timeout of 5 sec 
DEBUG: Fetching result from /tmp/timed_out_tmp_file_960 
DEBUG: TimedResult: alma-8-template
 
DEBUG: opening file /etc/sysconfig/network. 
INFO: OLD HOST NAME =  
INFO: Marker file exists or is undefined, pre-customization is not needed 
INFO: Customizing Network settings ...  
DEBUG: opening file /etc/sysconfig/network-scripts/ifcfg-ens192. 
DEBUG: DHCPV6C is '' 
DEBUG: opening file /etc/sysconfig/network-scripts/ifcfg-ens192. 
DEBUG: DHCPV6C_OPTIONS is '' 
DEBUG: opening file /etc/sysconfig/network-scripts/ifcfg-ens192. 
DEBUG: IPV6_AUTOCONF is '' 
DEBUG: opening file /etc/sysconfig/network-scripts/ifcfg-ens192. 
DEBUG: Match found   : Line = IPV6INIT=no
 
DEBUG: Actual String : no 
DEBUG: IPV6INIT is 'no' 
INFO: Erasing DHCP leases 
DEBUG: Command: 'pkill dhclient' 
DEBUG: Result:  
DEBUG: Exit Code: 256 
DEBUG: Command: 'rm -f /var/lib/dhcp/*' 
DEBUG: Result:  
DEBUG: Exit Code: 0 
DEBUG: Command: 'rm -f /var/lib/dhclient/*' 
DEBUG: Result:  
DEBUG: Exit Code: 0 
INFO: Resetting Network Administration Tool (redhat-config-network) 
DEBUG: Command: 'rm -rf /etc/sysconfig/networking/devices' 
DEBUG: Result:  
DEBUG: Exit Code: 0 
DEBUG: Command: 'rm -rf /etc/sysconfig/networking/profiles' 
DEBUG: Result:  
DEBUG: Exit Code: 0 
INFO: Primary NIC is 00:50:56:92:a2:6e 
DEBUG: Command: '/sbin/ifconfig -a' 
DEBUG: Result: ens192: flags=4098<BROADCAST,MULTICAST>  mtu 1500
        ether 00:50:56:92:a2:6e  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

ens224: flags=4098<BROADCAST,MULTICAST>  mtu 1500
        ether 00:50:56:92:9a:1f  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 1000  (Local Loopback)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

 
DEBUG: Exit Code: 0 
DEBUG: opening file /etc/sysconfig/network. 
DEBUG: Line : # Created by anaconda
 
INFO: GATEWAYDEV not found, created with ether 
INFO: GATEWAY not found 
INFO: Created with 10.192.228.1 
DEBUG: opening file for writing (/etc/sysconfig/network). 
DEBUG: Command: 'chmod 644 /etc/sysconfig/network' 
DEBUG: Result:  
DEBUG: Exit Code: 0 
DEBUG: Command: 'hostname alma-8-newhostname' 
DEBUG: Result:  
DEBUG: Exit Code: 0 
INFO: Customizing NICS ...  
DEBUG: Command: 'modprobe pcnet32 2> /dev/null' 
DEBUG: Result:  
DEBUG: Exit Code: 256 
DEBUG: Command: '/sbin/ifconfig eth0 2> /dev/null' 
DEBUG: Result:  
DEBUG: Exit Code: 256 
INFO: Customizing NICS. { NIC1,NIC2 } 
INFO: Customizing NIC NIC1 
DEBUG: Command: '/sbin/ifconfig -a' 
DEBUG: Result: ens192: flags=4098<BROADCAST,MULTICAST>  mtu 1500
        ether 00:50:56:92:a2:6e  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

ens224: flags=4098<BROADCAST,MULTICAST>  mtu 1500
        ether 00:50:56:92:9a:1f  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 1000  (Local Loopback)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

 
DEBUG: Exit Code: 0 
DEBUG: Deleting 0 files... 
DEBUG: Command: '/sbin/ifconfig -a' 
DEBUG: Result: ens192: flags=4098<BROADCAST,MULTICAST>  mtu 1500
        ether 00:50:56:92:a2:6e  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

ens224: flags=4098<BROADCAST,MULTICAST>  mtu 1500
        ether 00:50:56:92:9a:1f  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 1000  (Local Loopback)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

 
DEBUG: Exit Code: 0 
INFO: Writing ifcfg file for NIC suffix = ether 
INFO: Query config for ^(NIC1\|IPv6ADDR\|) 
INFO: Query config for ^(NIC1\|IPv6NETMASK\|) 
DEBUG: Command: '/sbin/ifconfig -a' 
DEBUG: Result: ens192: flags=4098<BROADCAST,MULTICAST>  mtu 1500
        ether 00:50:56:92:a2:6e  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

ens224: flags=4098<BROADCAST,MULTICAST>  mtu 1500
        ether 00:50:56:92:9a:1f  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 1000  (Local Loopback)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

 
DEBUG: Exit Code: 0 
DEBUG: opening file for writing (/etc/sysconfig/network-scripts/ifcfg-ether). 
DEBUG: Command: 'chmod 644 /etc/sysconfig/network-scripts/ifcfg-ether' 
DEBUG: Result:  
DEBUG: Exit Code: 0 
INFO: Query config for ^NIC1(\|IPv6GATEWAY\|) 
INFO: Configuring route (gateway settings) for ether. 
INFO: Configuring route 10.192.228.1 
DEBUG: opening file /etc/sysconfig/network-scripts/route-ether for appending. 
DEBUG: opening file /etc/sysconfig/network-scripts/route6-ether for appending. 
INFO: Customizing NIC NIC2 
DEBUG: Command: '/sbin/ifconfig -a' 
DEBUG: Result: ens192: flags=4098<BROADCAST,MULTICAST>  mtu 1500
        ether 00:50:56:92:a2:6e  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

ens224: flags=4098<BROADCAST,MULTICAST>  mtu 1500
        ether 00:50:56:92:9a:1f  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 1000  (Local Loopback)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

 
DEBUG: Exit Code: 0 
DEBUG: Deleting 0 files... 
DEBUG: Command: '/sbin/ifconfig -a' 
DEBUG: Result: ens192: flags=4098<BROADCAST,MULTICAST>  mtu 1500
        ether 00:50:56:92:a2:6e  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

ens224: flags=4098<BROADCAST,MULTICAST>  mtu 1500
        ether 00:50:56:92:9a:1f  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 1000  (Local Loopback)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

 
DEBUG: Exit Code: 0 
INFO: Writing ifcfg file for NIC suffix = ether 
INFO: Query config for ^(NIC2\|IPv6ADDR\|) 
INFO: Query config for ^(NIC2\|IPv6NETMASK\|) 
DEBUG: Command: '/sbin/ifconfig -a' 
DEBUG: Result: ens192: flags=4098<BROADCAST,MULTICAST>  mtu 1500
        ether 00:50:56:92:a2:6e  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

ens224: flags=4098<BROADCAST,MULTICAST>  mtu 1500
        ether 00:50:56:92:9a:1f  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 1000  (Local Loopback)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

 
DEBUG: Exit Code: 0 
DEBUG: opening file for writing (/etc/sysconfig/network-scripts/ifcfg-ether). 
DEBUG: Command: 'chmod 644 /etc/sysconfig/network-scripts/ifcfg-ether' 
DEBUG: Result:  
DEBUG: Exit Code: 0 
INFO: Query config for ^NIC2(\|IPv6GATEWAY\|) 
INFO: Cleanup default IPv4 route for ether. 
DEBUG: Command: '/bin/cat /etc/sysconfig/network-scripts/route-ether | /bin/grep -v default > /etc/sysconfig/network-scripts/route-ether.tmp' 
DEBUG: Result:  
DEBUG: Exit Code: 256 
DEBUG: Command: '/bin/mv -f /etc/sysconfig/network-scripts/route-ether.tmp /etc/sysconfig/network-scripts/route-ether' 
DEBUG: Result:  
DEBUG: Exit Code: 0 
INFO: Cleanup default IPv6 route for ether. 
DEBUG: Command: '/bin/cat /etc/sysconfig/network-scripts/route6-ether | /bin/grep -v default > /etc/sysconfig/network-scripts/route6-ether.tmp' 
DEBUG: Result:  
DEBUG: Exit Code: 256 
DEBUG: Command: '/bin/mv -f /etc/sysconfig/network-scripts/route6-ether.tmp /etc/sysconfig/network-scripts/route6-ether' 
DEBUG: Result:  
DEBUG: Exit Code: 0 
INFO: Configuring route (gateway settings) for ether. 
INFO: Configuring route 10.192.228.129 
DEBUG: opening file /etc/sysconfig/network-scripts/route-ether for appending. 
DEBUG: opening file /etc/sysconfig/network-scripts/route6-ether for appending. 
INFO: Customizing Hosts file ...  
DEBUG: Old hostname=[alma-8-template] 
DEBUG: Old FQDN=[alma-8-template] 
DEBUG: New hostname=[alma-8-newhostname] 
DEBUG: Building FQDN. HostnameFQDN: alma-8-newhostname, Domainname: tld.xxx 
DEBUG: New FQDN=[alma-8-newhostname.tld.xxx] 
DEBUG: opening file /etc/hosts. 
DEBUG: Line (inp): 127.0.0.1   localhost localhost.localdomain localhost4 localhost4.localdomain4
 
DEBUG: Line (inp): ::1         localhost localhost.localdomain localhost6 localhost6.localdomain6
 
DEBUG: Static ip entry added 
DEBUG: Line (out): 127.0.0.1   localhost localhost.localdomain localhost4 localhost4.localdomain4
 
DEBUG: Line (out): ::1         localhost localhost.localdomain localhost6 localhost6.localdomain6
 
DEBUG: Line (out): 
10.192.228.58	alma-8-newhostname.tld.xxx alma-8-newhostname
 
DEBUG: opening file for writing (/etc/hosts). 
DEBUG: Command: 'chmod 644 /etc/hosts' 
DEBUG: Result:  
DEBUG: Exit Code: 0 
INFO: Customizing DNS ...  
DEBUG: opening file /etc/nsswitch.conf. 
DEBUG: opening file for writing (/etc/nsswitch.conf). 
DEBUG: Command: 'chmod 644 /etc/nsswitch.conf' 
DEBUG: Result:  
DEBUG: Exit Code: 0 
INFO: Query config for ^(DNS\|SUFFIX\|) 
INFO: Query config for ^(DNS\|NAMESERVER\|) 
DEBUG: Match Found : DNS|NAMESERVER|2 
DEBUG: 0 
DEBUG: Match Found : DNS|NAMESERVER|1 
DEBUG: 1 
DEBUG: opening file for writing (/etc/resolv.conf). 
DEBUG: Command: 'chmod 644 /etc/resolv.conf' 
DEBUG: Result:  
DEBUG: Exit Code: 0 
INFO: Check if restorecon exists in /sbin 
DEBUG: Command: '/usr/bin/test -f /sbin/restorecon' 
DEBUG: Result:  
DEBUG: Exit Code: 0 
DEBUG: Command: '/sbin/restorecon /etc/resolv.conf' 
DEBUG: Result:  
DEBUG: Exit Code: 0 
DEBUG: Command: '/sbin/ifconfig -a' 
DEBUG: Result: ens192: flags=4098<BROADCAST,MULTICAST>  mtu 1500
        ether 00:50:56:92:a2:6e  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

ens224: flags=4098<BROADCAST,MULTICAST>  mtu 1500
        ether 00:50:56:92:9a:1f  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 1000  (Local Loopback)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

 
DEBUG: Exit Code: 0 
INFO: Query config for ^(DNS\|SUFFIX\|) 
INFO: Query config for ^(DNS\|NAMESERVER\|) 
DEBUG: Match Found : DNS|NAMESERVER|2 
DEBUG: 0 
DEBUG: Match Found : DNS|NAMESERVER|1 
DEBUG: 1 
DEBUG: opening file for writing (/etc/dhclient-ether.conf). 
DEBUG: Command: 'chmod 644 /etc/dhclient-ether.conf' 
DEBUG: Result:  
DEBUG: Exit Code: 0 
DEBUG: Command: '/sbin/ifconfig -a' 
DEBUG: Result: ens192: flags=4098<BROADCAST,MULTICAST>  mtu 1500
        ether 00:50:56:92:a2:6e  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

ens224: flags=4098<BROADCAST,MULTICAST>  mtu 1500
        ether 00:50:56:92:9a:1f  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 1000  (Local Loopback)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

 
DEBUG: Exit Code: 0 
INFO: Query config for ^(DNS\|SUFFIX\|) 
INFO: Query config for ^(DNS\|NAMESERVER\|) 
DEBUG: Match Found : DNS|NAMESERVER|2 
DEBUG: 0 
DEBUG: Match Found : DNS|NAMESERVER|1 
DEBUG: 1 
DEBUG: opening file for writing (/etc/dhclient-ether.conf). 
DEBUG: Command: 'chmod 644 /etc/dhclient-ether.conf' 
DEBUG: Result:  
DEBUG: Exit Code: 0 
DEBUG: Deleting 1 files... 
DEBUG: Deleting /etc/resolv.conf.sv... 
DEBUG: Skipping the delete: file doesn't exist or is a directory 
INFO: Customizing Date&Time ...  
INFO: Marker file exists or is undefined, password settings are not needed 
INFO: Marker file exists or is undefined, post-customization is not needed 
INFO: Marker creation is not needed 
INFO: Customization completed. 
DEBUG: Removing lock file /var/lock/vmware/gosc. 
'.

[2021-05-13T01:16:04.457Z] [    info] Wait before set enable-nics stats in vmx.

[2021-05-13T01:16:04.457Z] [   debug] Trying to connect network interfaces, attempt 1.

[2021-05-13T01:16:04.458Z] [   debug] Got VMX response 'queryNicsSupported'.

[2021-05-13T01:16:06.501Z] [   debug] Got VMX response 'connected'.

[2021-05-13T01:16:06.501Z] [    info] The network interfaces are connected on 0 second.

[2021-05-13T01:16:06.506Z] [    info] Transitioning from state 'INPROGRESS' to state 'Done'.

[2021-05-13T01:16:06.506Z] [    info] ENTER STATE 'Done'.

[2021-05-13T01:16:06.506Z] [    info] EXIT STATE 'INPROGRESS'.

[2021-05-13T01:16:06.506Z] [    info] Deployment succeeded.

[2021-05-13T01:16:06.506Z] [    info] Launching cleanup.

[2021-05-13T01:16:06.506Z] [   debug] Command to exec : '/bin/rm'.

[2021-05-13T01:16:06.506Z] [    info] sizeof ProcessInternal is 56

[2021-05-13T01:16:06.507Z] [    info] Returning, pending output from stdout
[2021-05-13T01:16:06.507Z] [    info] Returning, pending output from stderr
[2021-05-13T01:16:06.612Z] [    info] Process exited normally after 0 seconds, returned 0
[2021-05-13T01:16:06.612Z] [    info] No more output from stdout
[2021-05-13T01:16:06.612Z] [    info] No more output from stderr
[2021-05-13T01:16:06.612Z] [    info] Customization command output: ''.

[2021-05-13T01:16:06.612Z] [    info] sSkipReboot: 'false', forceSkipReboot 'false'.

[2021-05-13T01:16:06.612Z] [   debug] Ran DeployPkg_DeployPackageFromFile successfully
[2021-05-13T01:16:06.612Z] [   debug] ## Closing log
[2021-05-13T01:16:06.619Z] [    info] Trigger reboot.

[2021-05-13T01:16:06.619Z] [   debug] Command to exec : '/sbin/telinit'.

[2021-05-13T01:16:06.619Z] [    info] sizeof ProcessInternal is 56

[2021-05-13T01:16:06.620Z] [    info] Returning, pending output from stdout
[2021-05-13T01:16:06.620Z] [    info] Returning, pending output from stderr
[2021-05-13T01:16:06.709Z] [   error] Process exited abnormally after 0 sec, uncaught signal 15
[2021-05-13T01:16:06.709Z] [    info] No more output from stdout
[2021-05-13T01:16:06.709Z] [    info] No more output from stderr
[2021-05-13T01:16:06.709Z] [    info] Customization command output: ''.

[2021-05-13T01:16:06.709Z] [   error] Customization command failed with exitcode: 127, stderr: ''.

[2021-05-13T01:16:06.739Z] [   error] Failed to reboot, telinit returned error 127.

corporategadfly

2021-05-13 01:47

reporter   ~0000192

And I apologize for the delay in responding.

alukoshko

2021-05-25 23:07

administrator   ~0000212

Hello.
Looks like nothing can be done on open-vm-tools side. We have to wait for support from VMware.

jordane fillatre

2021-10-22 08:58

reporter   ~0000357

Hi,

I've just encountered the issue on the AlmaLinux release 8.4 (Electric Cheetah) and open-vm-tools.x86_64 11.2.0-2.el8
In my mind the issue is resolved by following: https://github.com/vmware/open-vm-tools/blob/master/ReleaseNotes.md#resolved-issues
But Im currently unable to build package in 11.3.5 to comfirm. Where is the roadmap for package update, either for AlmaLinux or the upstream?

Regards

alukoshko

2021-10-22 09:13

administrator   ~0000358

Hi.

RHEL 8.5 beta has version 11.2.5
CentOS Stream 8 has 11.3.5 https://koji.mbox.centos.org/koji/buildinfo?buildID=19617

Actually we don't know what version will be included in RHEL 8.5 stable.
But you can try CentOS Stream 8 package to confirm.

jordane fillatre

2021-10-22 12:22

reporter   ~0000360

Ok,
I'm able to use the CentOS Stream 11.3.5 build as you suggested.
I had to temporary update the /etc/redhat-release file content to "CentOS Linux release 8.4 (Electric Cheetah)" in order to succeed.

Regards

alukoshko

2021-10-22 12:37

administrator   ~0000361

What happens if you don't update /etc/redhat-release?

jordane fillatre

2021-10-25 09:58

reporter   ~0000366

Hi,
In the context of use of vsphere_virtual_machine terraform resource, the customisation still fail without redhat-release.

In attachment the toolsDeployPkg.log file

Regard
toolsDeployPkg.log (30,717 bytes)   
[2021-10-25T09:22:22.376Z] [   debug] ## Starting deploy pkg operation
[2021-10-25T09:22:22.376Z] [   debug] Deploying /var/run/113be74a/imcf-Oba5e9
[2021-10-25T09:22:22.376Z] [    info] Initializing deployment module.
[2021-10-25T09:22:22.376Z] [    info] Cleaning old state files.
[2021-10-25T09:22:22.376Z] [    info] EXIT STATE 'INPROGRESS'.
[2021-10-25T09:22:22.376Z] [   debug] Setting deploy error: 'Error removing lock '/var/log/.vmware-deploy.INPROGRESS'.(No such file or directory)'.
[2021-10-25T09:22:22.376Z] [    info] EXIT STATE 'Done'.
[2021-10-25T09:22:22.376Z] [   debug] Setting deploy error: 'Error removing lock '/var/log/.vmware-deploy.Done'.(No such file or directory)'.
[2021-10-25T09:22:22.376Z] [    info] EXIT STATE 'ERRORED'.
[2021-10-25T09:22:22.376Z] [   debug] Setting deploy error: 'Error removing lock '/var/log/.vmware-deploy.ERRORED'.(No such file or directory)'.
[2021-10-25T09:22:22.376Z] [   debug] Setting deploy error: 'Success.'.
[2021-10-25T09:22:22.376Z] [    info] Deploying cabinet file '/var/run/113be74a/imcf-Oba5e9'.
[2021-10-25T09:22:22.376Z] [    info] Transitioning from state '(null)' to state 'INPROGRESS'.
[2021-10-25T09:22:22.376Z] [    info] ENTER STATE 'INPROGRESS'.
[2021-10-25T09:22:22.379Z] [    info] Reading cabinet file '/var/run/113be74a/imcf-Oba5e9' and will extract it to '/var/run/.vmware-imgcust-dfZlCeB'.
[2021-10-25T09:22:22.379Z] [    info] Flags in the header: 0.
[2021-10-25T09:22:22.379Z] [    info] Original deployment command: '/usr/bin/perl -I/tmp/.vmware/linux/deploy/scripts /tmp/.vmware/linux/deploy/scripts/Customize.pl /tmp/.vmware/linux/deploy/cust.cfg'.
[2021-10-25T09:22:22.379Z] [    info] Actual deployment command: '/usr/bin/perl -I/var/run/.vmware-imgcust-dfZlCeB/scripts /var/run/.vmware-imgcust-dfZlCeB/scripts/Customize.pl /var/run/.vmware-imgcust-dfZlCeB/cust.cfg'.
[2021-10-25T09:22:22.379Z] [    info] Extracting package files.
[2021-10-25T09:22:22.441Z] [   debug] Command to exec : '/usr/bin/cloud-init'.
[2021-10-25T09:22:22.441Z] [    info] sizeof ProcessInternal is 56
[2021-10-25T09:22:22.441Z] [    info] Returning, pending output from stdout
[2021-10-25T09:22:22.441Z] [    info] Returning, pending output from stderr
[2021-10-25T09:22:22.445Z] [   error] execv failed to run (/usr/bin/cloud-init), errno=(2), error message:(No such file or directory)
[2021-10-25T09:22:22.446Z] [    info] Process exited normally after 0 seconds, returned 127
[2021-10-25T09:22:22.446Z] [    info] No more output from stdout
[2021-10-25T09:22:22.446Z] [    info] No more output from stderr
[2021-10-25T09:22:22.446Z] [    info] Customization command output:
''.
[2021-10-25T09:22:22.446Z] [   error] Customization command failed with exitcode: 127, stderr: ''.
[2021-10-25T09:22:22.446Z] [    info] cloud-init is not installed.
[2021-10-25T09:22:22.446Z] [    info] UseCloudInitWorkflow return: 3
[2021-10-25T09:22:22.446Z] [    info] Executing traditional GOSC workflow.
[2021-10-25T09:22:22.446Z] [   debug] Command to exec : '/usr/bin/perl'.
[2021-10-25T09:22:22.446Z] [    info] sizeof ProcessInternal is 56
[2021-10-25T09:22:22.447Z] [    info] Returning, pending output from stdout
[2021-10-25T09:22:22.447Z] [    info] Returning, pending output from stderr
[2021-10-25T09:22:22.847Z] [    info] Saving output from stdout
[2021-10-25T09:22:22.847Z] [    info] Saving output from stdout
[2021-10-25T09:22:22.847Z] [    info] Saving output from stdout
[2021-10-25T09:22:22.847Z] [    info] Saving output from stdout
[2021-10-25T09:22:22.847Z] [    info] Saving output from stdout
[2021-10-25T09:22:22.847Z] [    info] Saving output from stdout
[2021-10-25T09:22:22.847Z] [    info] Saving output from stdout
[2021-10-25T09:22:22.947Z] [    info] Saving output from stdout
[2021-10-25T09:22:23.047Z] [    info] Saving output from stdout
[2021-10-25T09:22:23.047Z] [    info] Saving output from stdout
[2021-10-25T09:22:23.047Z] [    info] Saving output from stdout
[2021-10-25T09:22:23.047Z] [    info] Saving output from stdout
[2021-10-25T09:22:23.047Z] [    info] Saving output from stdout
[2021-10-25T09:22:23.047Z] [    info] Saving output from stdout
[2021-10-25T09:22:23.047Z] [    info] Saving output from stdout
[2021-10-25T09:22:23.047Z] [    info] Saving output from stdout
[2021-10-25T09:22:23.047Z] [    info] Saving output from stdout
[2021-10-25T09:22:23.047Z] [    info] Saving output from stdout
[2021-10-25T09:22:23.147Z] [    info] Process exited normally after 0 seconds, returned 0
[2021-10-25T09:22:23.147Z] [    info] Saving output from stdout
[2021-10-25T09:22:23.147Z] [    info] Saving output from stdout
[2021-10-25T09:22:23.147Z] [    info] Saving output from stdout
[2021-10-25T09:22:23.147Z] [    info] Saving output from stdout
[2021-10-25T09:22:23.147Z] [    info] No more output from stdout
[2021-10-25T09:22:23.147Z] [    info] No more output from stderr
[2021-10-25T09:22:23.147Z] [    info] Customization command output:
=================== Perl script log start =================
DEBUG: Creating directory /var/lock/vmware 
DEBUG: Opening /var/lock/vmware/gosc in O_CREAT|O_EXCL|O_WRONLY mode 
INFO: Opening file name /var/run/.vmware-imgcust-dfZlCeB/cust.cfg. 
DEBUG: Processing line: '[NETWORK]' 
DEBUG: FOUND CATEGORY = NETWORK 
DEBUG: Processing line: 'NETWORKING = yes' 
DEBUG: ADDED KEY-VAL :: 'NETWORK|NETWORKING' = 'yes' 
DEBUG: Processing line: 'BOOTPROTO = dhcp' 
DEBUG: ADDED KEY-VAL :: 'NETWORK|BOOTPROTO' = 'dhcp' 
DEBUG: Processing line: 'HOSTNAME = RD-DEVOPS1-SUPPORT1' 
DEBUG: ADDED KEY-VAL :: 'NETWORK|HOSTNAME' = 'RD-DEVOPS1-SUPPORT1' 
DEBUG: Processing line: 'DOMAINNAME = thingpark.local' 
DEBUG: ADDED KEY-VAL :: 'NETWORK|DOMAINNAME' = 'thingpark.local' 
DEBUG: Processing line: '' 
DEBUG: Empty line. Ignored. 
DEBUG: Processing line: '[NIC-CONFIG]' 
DEBUG: FOUND CATEGORY = NIC-CONFIG 
DEBUG: Processing line: 'NICS = NIC1,NIC2' 
DEBUG: ADDED KEY-VAL :: 'NIC-CONFIG|NICS' = 'NIC1,NIC2' 
DEBUG: Processing line: '' 
DEBUG: Empty line. Ignored. 
DEBUG: Processing line: '[NIC1]' 
DEBUG: FOUND CATEGORY = NIC1 
DEBUG: Processing line: 'MACADDR = 00:50:56:a3:ff:89' 
DEBUG: ADDED KEY-VAL :: 'NIC1|MACADDR' = '00:50:56:a3:ff:89' 
DEBUG: Processing line: 'ONBOOT = yes' 
DEBUG: ADDED KEY-VAL :: 'NIC1|ONBOOT' = 'yes' 
DEBUG: Processing line: 'IPv4_MODE = BACKWARDS_COMPATIBLE' 
DEBUG: ADDED KEY-VAL :: 'NIC1|IPv4_MODE' = 'BACKWARDS_COMPATIBLE' 
DEBUG: Processing line: 'BOOTPROTO = static' 
DEBUG: ADDED KEY-VAL :: 'NIC1|BOOTPROTO' = 'static' 
DEBUG: Processing line: 'IPADDR = 192.168.243.18' 
DEBUG: ADDED KEY-VAL :: 'NIC1|IPADDR' = '192.168.243.18' 
DEBUG: Processing line: 'NETMASK = 255.255.255.0' 
DEBUG: ADDED KEY-VAL :: 'NIC1|NETMASK' = '255.255.255.0' 
DEBUG: Processing line: '' 
DEBUG: Empty line. Ignored. 
DEBUG: Processing line: '[NIC2]' 
DEBUG: FOUND CATEGORY = NIC2 
DEBUG: Processing line: 'MACADDR = 00:50:56:a3:a6:90' 
DEBUG: ADDED KEY-VAL :: 'NIC2|MACADDR' = '00:50:56:a3:a6:90' 
DEBUG: Processing line: 'ONBOOT = yes' 
DEBUG: ADDED KEY-VAL :: 'NIC2|ONBOOT' = 'yes' 
DEBUG: Processing line: 'IPv4_MODE = BACKWARDS_COMPATIBLE' 
DEBUG: ADDED KEY-VAL :: 'NIC2|IPv4_MODE' = 'BACKWARDS_COMPATIBLE' 
DEBUG: Processing line: 'BOOTPROTO = static' 
DEBUG: ADDED KEY-VAL :: 'NIC2|BOOTPROTO' = 'static' 
DEBUG: Processing line: 'IPADDR = 172.16.243.45' 
DEBUG: ADDED KEY-VAL :: 'NIC2|IPADDR' = '172.16.243.45' 
DEBUG: Processing line: 'NETMASK = 255.255.255.0' 
DEBUG: ADDED KEY-VAL :: 'NIC2|NETMASK' = '255.255.255.0' 
DEBUG: Processing line: 'GATEWAY = 172.16.243.254' 
DEBUG: ADDED KEY-VAL :: 'NIC2|GATEWAY' = '172.16.243.254' 
DEBUG: Processing line: '' 
DEBUG: Empty line. Ignored. 
DEBUG: Processing line: '' 
DEBUG: Empty line. Ignored. 
DEBUG: Processing line: '[DNS]' 
DEBUG: FOUND CATEGORY = DNS 
DEBUG: Processing line: 'DNSFROMDHCP=no' 
DEBUG: ADDED KEY-VAL :: 'DNS|DNSFROMDHCP' = 'no' 
DEBUG: Processing line: '' 
DEBUG: Empty line. Ignored. 
DEBUG: Processing line: 'NAMESERVER|1 = 8.8.8.8' 
DEBUG: ADDED KEY-VAL :: 'DNS|NAMESERVER|1' = '8.8.8.8' 
DEBUG: Processing line: '' 
DEBUG: Empty line. Ignored. 
DEBUG: Processing line: '[DATETIME]' 
DEBUG: FOUND CATEGORY = DATETIME 
DEBUG: Processing line: 'UTC = yes' 
DEBUG: ADDED KEY-VAL :: 'DATETIME|UTC' = 'yes' 
DEBUG: Reading issue file ...  
DEBUG: Command: 'cat /etc/issue' 
DEBUG: Result: \S
Kernel \r on an \m

 
DEBUG: Exit Code: 0 
DEBUG: Reading /etc/os-release file ...  
DEBUG: opening file /etc/os-release. 
DEBUG: Match found   : Line = PRETTY_NAME="AlmaLinux 8.4 (Electric Cheetah)"
 
DEBUG: Actual String : "AlmaLinux 8.4 (Electric Cheetah)" 
DEBUG: Reading issue file ...  
DEBUG: Command: 'cat /etc/issue' 
DEBUG: Result: \S
Kernel \r on an \m

 
DEBUG: Exit Code: 0 
DEBUG: \S
Kernel \r on an \m

 
DEBUG: Reading /etc/os-release file ...  
DEBUG: opening file /etc/os-release. 
DEBUG: Match found   : Line = ID="almalinux"
 
DEBUG: Actual String : "almalinux" 
DEBUG: ID: "almalinux" 
DEBUG: opening file /etc/os-release. 
DEBUG: Match found   : Line = VERSION_ID="8.4"
 
DEBUG: Actual String : "8.4" 
DEBUG: Version: "8.4" 
WARNING: Amazon Linux flavor not detected 
DEBUG: Reading issue file ...  
DEBUG: Command: 'cat /etc/issue' 
DEBUG: Result: \S
Kernel \r on an \m

 
DEBUG: Exit Code: 0 
DEBUG: \S
Kernel \r on an \m

 
DEBUG: Reading redhat-release file ...  
DEBUG: Command: 'cat /etc/redhat-release' 
DEBUG: Result: AlmaLinux release 8.4 (Electric Cheetah)
 
DEBUG: Exit Code: 0 
DEBUG: AlmaLinux release 8.4 (Electric Cheetah)
 
WARNING: Redhat flavor not detected 
DEBUG: Reading issue file ...  
DEBUG: Command: 'cat /etc/issue' 
DEBUG: Result: \S
Kernel \r on an \m

 
DEBUG: Exit Code: 0 
DEBUG: \S
Kernel \r on an \m

 
DEBUG: Reading redhat-release file ...  
DEBUG: Command: 'cat /etc/redhat-release' 
DEBUG: Result: AlmaLinux release 8.4 (Electric Cheetah)
 
DEBUG: Exit Code: 0 
DEBUG: AlmaLinux release 8.4 (Electric Cheetah)
 
WARNING: Redhat flavor not detected 
INFO: Detected distribution: RedHat Linux Distribution 
DEBUG: Reading issue file ...  
DEBUG: Command: 'cat /etc/issue' 
DEBUG: Result: \S
Kernel \r on an \m

 
DEBUG: Exit Code: 0 
DEBUG: \S
Kernel \r on an \m

 
DEBUG: Reading redhat-release file ...  
DEBUG: Command: 'cat /etc/redhat-release' 
DEBUG: Result: AlmaLinux release 8.4 (Electric Cheetah)
 
DEBUG: Exit Code: 0 
DEBUG: AlmaLinux release 8.4 (Electric Cheetah)
 
WARNING: Redhat flavor not detected 
WARNING: Unknown RedHat Linux Distribution distribution flavour. 
INFO: Customization instance RedHatCustomization loaded. 
INFO: Customization started 
DEBUG: Command: 'hostname 2>/dev/null' 
DEBUG: Result: localhost.localdomain
 
DEBUG: Exit Code: 0 
DEBUG: TimedCommand: 'hostname -f 2>/dev/null' with timeout of 5 sec 
DEBUG: Fetching result from /tmp/timed_out_tmp_file_1012 
DEBUG: TimedResult: localhost
 
DEBUG: opening file /etc/sysconfig/network. 
INFO: OLD HOST NAME =  
INFO: Marker file exists or is undefined, pre-customization is not needed 
INFO: Customizing Network settings ...  
DEBUG: opening file /etc/sysconfig/network-scripts/ifcfg-ens192. 
DEBUG: DHCPV6C is '' 
DEBUG: opening file /etc/sysconfig/network-scripts/ifcfg-ens192. 
DEBUG: DHCPV6C_OPTIONS is '' 
DEBUG: opening file /etc/sysconfig/network-scripts/ifcfg-ens192. 
DEBUG: Match found   : Line = IPV6_AUTOCONF=yes
 
DEBUG: Actual String : yes 
DEBUG: IPV6_AUTOCONF is 'yes' 
DEBUG: opening file /etc/sysconfig/network-scripts/ifcfg-ens192. 
DEBUG: Match found   : Line = IPV6INIT=yes
 
DEBUG: Actual String : yes 
DEBUG: IPV6INIT is 'yes' 
INFO: Erasing DHCP leases 
DEBUG: Command: 'pkill dhclient' 
DEBUG: Result:  
DEBUG: Exit Code: 256 
DEBUG: Command: 'rm -f /var/lib/dhcp/*' 
DEBUG: Result:  
DEBUG: Exit Code: 0 
DEBUG: Command: 'rm -f /var/lib/dhclient/*' 
DEBUG: Result:  
DEBUG: Exit Code: 0 
INFO: Resetting Network Administration Tool (redhat-config-network) 
DEBUG: Command: 'rm -rf /etc/sysconfig/networking/devices' 
DEBUG: Result:  
DEBUG: Exit Code: 0 
DEBUG: Command: 'rm -rf /etc/sysconfig/networking/profiles' 
DEBUG: Result:  
DEBUG: Exit Code: 0 
INFO: Primary NIC is not defined 
DEBUG: opening file /etc/sysconfig/network. 
DEBUG: Line : # Created by anaconda
 
DEBUG: opening file for writing (/etc/sysconfig/network). 
DEBUG: Command: 'chmod 644 /etc/sysconfig/network' 
DEBUG: Result:  
DEBUG: Exit Code: 0 
DEBUG: Command: 'hostname RD-DEVOPS1-SUPPORT1' 
DEBUG: Result:  
DEBUG: Exit Code: 0 
INFO: Customizing NICS ...  
DEBUG: Command: 'modprobe pcnet32 2> /dev/null' 
DEBUG: Result:  
DEBUG: Exit Code: 256 
DEBUG: Command: '/sbin/ifconfig eth0 2> /dev/null' 
DEBUG: Result:  
DEBUG: Exit Code: 256 
INFO: Customizing NICS. { NIC1,NIC2 } 
INFO: Customizing NIC NIC1 
DEBUG: Command: '/sbin/ifconfig -a' 
DEBUG: Result: ens192: flags=4098<BROADCAST,MULTICAST>  mtu 1500
        ether 00:50:56:a3:ff:89  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

ens224: flags=4098<BROADCAST,MULTICAST>  mtu 1500
        ether 00:50:56:a3:a6:90  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 1000  (Local Loopback)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

 
DEBUG: Exit Code: 0 
DEBUG: Deleting 0 files... 
DEBUG: Command: '/sbin/ifconfig -a' 
DEBUG: Result: ens192: flags=4098<BROADCAST,MULTICAST>  mtu 1500
        ether 00:50:56:a3:ff:89  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

ens224: flags=4098<BROADCAST,MULTICAST>  mtu 1500
        ether 00:50:56:a3:a6:90  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 1000  (Local Loopback)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

 
DEBUG: Exit Code: 0 
INFO: Writing ifcfg file for NIC suffix = ether 
INFO: Query config for ^(NIC1\|IPv6ADDR\|) 
INFO: Query config for ^(NIC1\|IPv6NETMASK\|) 
DEBUG: Command: '/sbin/ifconfig -a' 
DEBUG: Result: ens192: flags=4098<BROADCAST,MULTICAST>  mtu 1500
        ether 00:50:56:a3:ff:89  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

ens224: flags=4098<BROADCAST,MULTICAST>  mtu 1500
        ether 00:50:56:a3:a6:90  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 1000  (Local Loopback)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

 
DEBUG: Exit Code: 0 
DEBUG: opening file for writing (/etc/sysconfig/network-scripts/ifcfg-ether). 
DEBUG: Command: 'chmod 644 /etc/sysconfig/network-scripts/ifcfg-ether' 
DEBUG: Result:  
DEBUG: Exit Code: 0 
INFO: Query config for ^NIC1(\|IPv6GATEWAY\|) 
INFO: Customizing NIC NIC2 
DEBUG: Command: '/sbin/ifconfig -a' 
DEBUG: Result: ens192: flags=4098<BROADCAST,MULTICAST>  mtu 1500
        ether 00:50:56:a3:ff:89  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

ens224: flags=4098<BROADCAST,MULTICAST>  mtu 1500
        ether 00:50:56:a3:a6:90  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 1000  (Local Loopback)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

 
DEBUG: Exit Code: 0 
DEBUG: Deleting 0 files... 
DEBUG: Command: '/sbin/ifconfig -a' 
DEBUG: Result: ens192: flags=4098<BROADCAST,MULTICAST>  mtu 1500
        ether 00:50:56:a3:ff:89  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

ens224: flags=4098<BROADCAST,MULTICAST>  mtu 1500
        ether 00:50:56:a3:a6:90  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 1000  (Local Loopback)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

 
DEBUG: Exit Code: 0 
INFO: Writing ifcfg file for NIC suffix = ether 
INFO: Query config for ^(NIC2\|IPv6ADDR\|) 
INFO: Query config for ^(NIC2\|IPv6NETMASK\|) 
DEBUG: Command: '/sbin/ifconfig -a' 
DEBUG: Result: ens192: flags=4098<BROADCAST,MULTICAST>  mtu 1500
        ether 00:50:56:a3:ff:89  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

ens224: flags=4098<BROADCAST,MULTICAST>  mtu 1500
        ether 00:50:56:a3:a6:90  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 1000  (Local Loopback)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

 
DEBUG: Exit Code: 0 
DEBUG: opening file for writing (/etc/sysconfig/network-scripts/ifcfg-ether). 
DEBUG: Command: 'chmod 644 /etc/sysconfig/network-scripts/ifcfg-ether' 
DEBUG: Result:  
DEBUG: Exit Code: 0 
INFO: Query config for ^NIC2(\|IPv6GATEWAY\|) 
INFO: Configuring route (gateway settings) for ether. 
INFO: Configuring route 172.16.243.254 
DEBUG: opening file /etc/sysconfig/network-scripts/route-ether for appending. 
DEBUG: opening file /etc/sysconfig/network-scripts/route6-ether for appending. 
INFO: Customizing Hosts file ...  
DEBUG: Old hostname=[localhost.localdomain] 
DEBUG: Old FQDN=[localhost] 
DEBUG: New hostname=[RD-DEVOPS1-SUPPORT1] 
DEBUG: Building FQDN. HostnameFQDN: RD-DEVOPS1-SUPPORT1, Domainname: thingpark.local 
DEBUG: New FQDN=[RD-DEVOPS1-SUPPORT1.thingpark.local] 
DEBUG: opening file /etc/hosts. 
DEBUG: Line (inp): 127.0.0.1   localhost localhost.localdomain localhost4 localhost4.localdomain4
 
DEBUG: Line (inp): ::1         localhost localhost.localdomain localhost6 localhost6.localdomain6
 
DEBUG: Static ip entry added 
DEBUG: Line (out): 127.0.0.1   localhost localhost.localdomain localhost4 localhost4.localdomain4
 
DEBUG: Line (out): ::1         localhost localhost.localdomain localhost6 localhost6.localdomain6
 
DEBUG: Line (out): 
192.168.243.18	RD-DEVOPS1-SUPPORT1.thingpark.local RD-DEVOPS1-SUPPORT1
 
DEBUG: opening file for writing (/etc/hosts). 
DEBUG: Command: 'chmod 644 /etc/hosts' 
DEBUG: Result:  
DEBUG: Exit Code: 0 
INFO: Customizing DNS ...  
DEBUG: opening file /etc/nsswitch.conf. 
DEBUG: opening file for writing (/etc/nsswitch.conf). 
DEBUG: Command: 'chmod 644 /etc/nsswitch.conf' 
DEBUG: Result:  
DEBUG: Exit Code: 0 
INFO: Query config for ^(DNS\|SUFFIX\|) 
INFO: Query config for ^(DNS\|NAMESERVER\|) 
DEBUG: Match Found : DNS|NAMESERVER|1 
DEBUG: 0 
DEBUG: opening file for writing (/etc/resolv.conf). 
DEBUG: Command: 'chmod 644 /etc/resolv.conf' 
DEBUG: Result:  
DEBUG: Exit Code: 0 
DEBUG: Command: '/usr/sbin/selinuxenabled' 
DEBUG: Result:  
DEBUG: Exit Code: 0 
DEBUG: selinux is enabled 
DEBUG: Command: '/usr/sbin/restorecon /etc/resolv.conf' 
DEBUG: Result:  
DEBUG: Exit Code: 0 
DEBUG: Command: '/sbin/ifconfig -a' 
DEBUG: Result: ens192: flags=4098<BROADCAST,MULTICAST>  mtu 1500
        ether 00:50:56:a3:ff:89  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

ens224: flags=4098<BROADCAST,MULTICAST>  mtu 1500
        ether 00:50:56:a3:a6:90  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 1000  (Local Loopback)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

 
DEBUG: Exit Code: 0 
INFO: Query config for ^(DNS\|SUFFIX\|) 
INFO: Query config for ^(DNS\|NAMESERVER\|) 
DEBUG: Match Found : DNS|NAMESERVER|1 
DEBUG: 0 
DEBUG: opening file for writing (/etc/dhclient-ether.conf). 
DEBUG: Command: 'chmod 644 /etc/dhclient-ether.conf' 
DEBUG: Result:  
DEBUG: Exit Code: 0 
DEBUG: Command: '/sbin/ifconfig -a' 
DEBUG: Result: ens192: flags=4098<BROADCAST,MULTICAST>  mtu 1500
        ether 00:50:56:a3:ff:89  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

ens224: flags=4098<BROADCAST,MULTICAST>  mtu 1500
        ether 00:50:56:a3:a6:90  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 1000  (Local Loopback)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

 
DEBUG: Exit Code: 0 
INFO: Query config for ^(DNS\|SUFFIX\|) 
INFO: Query config for ^(DNS\|NAMESERVER\|) 
DEBUG: Match Found : DNS|NAMESERVER|1 
DEBUG: 0 
DEBUG: opening file for writing (/etc/dhclient-ether.conf). 
DEBUG: Command: 'chmod 644 /etc/dhclient-ether.conf' 
DEBUG: Result:  
DEBUG: Exit Code: 0 
DEBUG: Deleting 1 files... 
DEBUG: Deleting /etc/resolv.conf.sv... 
DEBUG: Skipping the delete: file doesn't exist or is a directory 
INFO: Customizing Date&Time ...  
DEBUG: opening file for writing (/etc/sysconfig/clock). 
DEBUG: Command: 'chmod 644 /etc/sysconfig/clock' 
DEBUG: Result:  
DEBUG: Exit Code: 0 
INFO: Marker file exists or is undefined, password settings are not needed 
INFO: Marker file exists or is undefined, post-customization is not needed 
INFO: Marker creation is not needed 
INFO: Customization completed. 
DEBUG: Removing lock file /var/lock/vmware/gosc. 

=================== Perl script log end =================
[2021-10-25T09:22:28.147Z] [    info] Wait before set enable-nics stats in vmx.
[2021-10-25T09:22:28.147Z] [   debug] Trying to connect network interfaces, attempt 1.
[2021-10-25T09:22:28.149Z] [   debug] Got VMX response 'queryNicsSupported'.
[2021-10-25T09:22:30.193Z] [   debug] Got VMX response 'connected'.
[2021-10-25T09:22:30.193Z] [    info] The network interfaces are connected on 0 second.
[2021-10-25T09:22:30.193Z] [    info] Transitioning from state 'INPROGRESS' to state 'Done'.
[2021-10-25T09:22:30.193Z] [    info] ENTER STATE 'Done'.
[2021-10-25T09:22:30.193Z] [    info] EXIT STATE 'INPROGRESS'.
[2021-10-25T09:22:30.194Z] [    info] Deployment succeeded.
[2021-10-25T09:22:30.194Z] [    info] Launching cleanup.
[2021-10-25T09:22:30.194Z] [   debug] Command to exec : '/bin/rm'.
[2021-10-25T09:22:30.194Z] [    info] sizeof ProcessInternal is 56
[2021-10-25T09:22:30.194Z] [    info] Returning, pending output from stdout
[2021-10-25T09:22:30.194Z] [    info] Returning, pending output from stderr
[2021-10-25T09:22:30.294Z] [    info] Process exited normally after 0 seconds, returned 0
[2021-10-25T09:22:30.295Z] [    info] No more output from stdout
[2021-10-25T09:22:30.295Z] [    info] No more output from stderr
[2021-10-25T09:22:30.295Z] [    info] Customization command output:
''.
[2021-10-25T09:22:30.295Z] [    info] sSkipReboot: 'false', forceSkipReboot 'false'.
[2021-10-25T09:22:30.295Z] [   debug] Ran DeployPkg_DeployPackageFromFile successfully
[2021-10-25T09:22:30.295Z] [   debug] ## Closing log
[2021-10-25T09:22:30.295Z] [   debug] Command to exec : '/bin/readlink'.
[2021-10-25T09:22:30.295Z] [    info] sizeof ProcessInternal is 56
[2021-10-25T09:22:30.296Z] [    info] Returning, pending output from stdout
[2021-10-25T09:22:30.296Z] [    info] Returning, pending output from stderr
[2021-10-25T09:22:30.396Z] [    info] Process exited normally after 0 seconds, returned 0
[2021-10-25T09:22:30.396Z] [    info] Saving output from stdout
[2021-10-25T09:22:30.396Z] [    info] No more output from stdout
[2021-10-25T09:22:30.396Z] [    info] No more output from stderr
[2021-10-25T09:22:30.396Z] [    info] Customization command output:
'../bin/systemctl
'.
[2021-10-25T09:22:30.396Z] [   debug] /sbin/telinit is a soft link to systemctl
[2021-10-25T09:22:30.396Z] [    info] Trigger reboot.
[2021-10-25T09:22:30.396Z] [   debug] Command to exec : '/sbin/telinit'.
[2021-10-25T09:22:30.396Z] [    info] sizeof ProcessInternal is 56
[2021-10-25T09:22:30.396Z] [    info] Returning, pending output from stdout
[2021-10-25T09:22:30.396Z] [    info] Returning, pending output from stderr
[2021-10-25T09:22:30.487Z] [   error] Process exited abnormally after 0 sec, uncaught signal 15
[2021-10-25T09:22:30.487Z] [    info] No more output from stdout
[2021-10-25T09:22:30.487Z] [    info] No more output from stderr
[2021-10-25T09:22:30.487Z] [    info] Customization command output:
''.
[2021-10-25T09:22:30.487Z] [    info] Telinit command failed with exitcode: 127, stderr: ''.
[2021-10-25T09:22:31.487Z] [   debug] Command to exec : '/sbin/telinit'.
[2021-10-25T09:22:31.487Z] [    info] sizeof ProcessInternal is 56
[2021-10-25T09:22:31.488Z] [    info] Returning, pending output from stdout
[2021-10-25T09:22:31.488Z] [    info] Returning, pending output from stderr
[2021-10-25T09:22:31.588Z] [    info] Process exited normally after 0 seconds, returned 0
[2021-10-25T09:22:31.588Z] [    info] No more output from stdout
[2021-10-25T09:22:31.588Z] [    info] No more output from stderr
[2021-10-25T09:22:31.588Z] [    info] Customization command output:
''.
[2021-10-25T09:22:32.588Z] [    info] Rebooting.
[2021-10-25T09:22:32.588Z] [   debug] Command to exec : '/sbin/telinit'.
[2021-10-25T09:22:32.588Z] [    info] sizeof ProcessInternal is 56
[2021-10-25T09:22:32.589Z] [    info] Returning, pending output from stdout
[2021-10-25T09:22:32.589Z] [    info] Returning, pending output from stderr
[2021-10-25T09:22:32.689Z] [    info] Process exited normally after 0 seconds, returned 0
[2021-10-25T09:22:32.689Z] [    info] No more output from stdout
[2021-10-25T09:22:32.689Z] [    info] No more output from stderr
[2021-10-25T09:22:32.689Z] [    info] Customization command output:
''.
[2021-10-25T09:22:33.689Z] [    info] Rebooting.
[2021-10-25T09:22:33.689Z] [   debug] Command to exec : '/sbin/telinit'.
[2021-10-25T09:22:33.689Z] [    info] sizeof ProcessInternal is 56
[2021-10-25T09:22:33.690Z] [    info] Returning, pending output from stdout
[2021-10-25T09:22:33.690Z] [    info] Returning, pending output from stderr
[2021-10-25T09:22:33.790Z] [    info] Process exited normally after 0 seconds, returned 0
[2021-10-25T09:22:33.790Z] [    info] No more output from stdout
[2021-10-25T09:22:33.790Z] [    info] No more output from stderr
[2021-10-25T09:22:33.790Z] [    info] Customization command output:
''.
[2021-10-25T09:22:34.790Z] [    info] Rebooting.
[2021-10-25T09:22:34.790Z] [   debug] Command to exec : '/sbin/telinit'.
[2021-10-25T09:22:34.790Z] [    info] sizeof ProcessInternal is 56
[2021-10-25T09:22:34.790Z] [    info] Returning, pending output from stdout
[2021-10-25T09:22:34.790Z] [    info] Returning, pending output from stderr
[2021-10-25T09:22:34.891Z] [    info] Process exited normally after 0 seconds, returned 0
[2021-10-25T09:22:34.891Z] [    info] No more output from stdout
[2021-10-25T09:22:34.891Z] [    info] No more output from stderr
[2021-10-25T09:22:34.891Z] [    info] Customization command output:
''.
toolsDeployPkg.log (30,717 bytes)   

drazenk

2021-11-22 14:19

reporter   ~0000415

FWIW, I had the same issue and I've worked around it by installing cloud-init (with a suitable configuration) on the template VM.

Without cloud-init VmWare will run some Perl script(s) which will correctly figure out that it's running on something which is RHEL compatible, but won't find the distro name in its list. And then it falls back to the wrong configuration mechanism. It could have tried to use the same configuration mechanism as for the equivalent RHEL release and that would have probably worked fine. But instead it falls back to some other mechanism which doesn't work. I think (but am not 100% sure) it's trying to use the mechanism for the oldest RHEL release it knows about, but that doesn't work on a RHEL 8 clone. Maybe it would with some compatibility packages installed, but I wouldn't go that route.

I don't know from where are those Perl scripts coming. I don't see anything Perlish in the open-vm-tools package (or its dependencies). If the Perl code is coming from VmWare hypervisor then there's nothing Alma Linux (or any other) distribution can do.

But in any case, cloud-init is the new official way to configure cloned VMs and it does work once you manage to figure out how to configure it. Also doesn't have dependencies on the code which is not in the distribution.

alukoshko

2021-11-22 14:56

administrator   ~0000417

Thank you drazenk for this update.
I think we should add an article to wiki about that.

drazenk

2021-11-25 20:29

reporter   ~0000428

I had to debug something with this, so I have more info to share. VmWare will put the relevant logs into /var/log/vmware-imc directory.
I'm attaching my log when cloud-init is in use. But you can see (more or less) that VmWare tools are getting a Perl script out of thin air. :-)
toolsDeployPkg-2.log (8,181 bytes)   
[2021-11-24T15:05:46.611Z] [   debug] ## Starting deploy pkg operation
[2021-11-24T15:05:46.611Z] [   debug] Deploying /var/run/b3671f5f/imcf-JJloah
[2021-11-24T15:05:46.611Z] [    info] Initializing deployment module.
[2021-11-24T15:05:46.611Z] [    info] Cleaning old state files.
[2021-11-24T15:05:46.611Z] [    info] EXIT STATE 'INPROGRESS'.
[2021-11-24T15:05:46.611Z] [   debug] Setting deploy error: 'Error removing lock '/var/log/.vmware-deploy.INPROGRESS'.(No such file or directory)'.
[2021-11-24T15:05:46.611Z] [    info] EXIT STATE 'Done'.
[2021-11-24T15:05:46.611Z] [   debug] Setting deploy error: 'Error removing lock '/var/log/.vmware-deploy.Done'.(No such file or directory)'.
[2021-11-24T15:05:46.611Z] [    info] EXIT STATE 'ERRORED'.
[2021-11-24T15:05:46.611Z] [   debug] Setting deploy error: 'Error removing lock '/var/log/.vmware-deploy.ERRORED'.(No such file or directory)'.
[2021-11-24T15:05:46.611Z] [   debug] Setting deploy error: 'Success.'.
[2021-11-24T15:05:46.611Z] [    info] Deploying cabinet file '/var/run/b3671f5f/imcf-JJloah'.
[2021-11-24T15:05:46.611Z] [    info] Transitioning from state '(null)' to state 'INPROGRESS'.
[2021-11-24T15:05:46.611Z] [    info] ENTER STATE 'INPROGRESS'.
[2021-11-24T15:05:46.613Z] [    info] Reading cabinet file '/var/run/b3671f5f/imcf-JJloah' and will extract it to '/var/run/.vmware-imgcust-dHAR9Rt'.
[2021-11-24T15:05:46.613Z] [    info] Flags in the header: 0.
[2021-11-24T15:05:46.613Z] [    info] Original deployment command: '/usr/bin/perl -I/tmp/.vmware/linux/deploy/scripts /tmp/.vmware/linux/deploy/scripts/Customize.pl /tmp/.vmware/linux/deploy/cust.cfg'.
[2021-11-24T15:05:46.613Z] [    info] Actual deployment command: '/usr/bin/perl -I/var/run/.vmware-imgcust-dHAR9Rt/scripts /var/run/.vmware-imgcust-dHAR9Rt/scripts/Customize.pl /var/run/.vmware-imgcust-dHAR9Rt/cust.cfg'.
[2021-11-24T15:05:46.613Z] [    info] Extracting package files.
[2021-11-24T15:05:46.646Z] [   debug] Check if cust.cfg exists.
[2021-11-24T15:05:46.646Z] [    info] cust.cfg is found in '/var/run/.vmware-imgcust-dHAR9Rt' directory.
[2021-11-24T15:05:46.646Z] [   debug] Command to exec : '/usr/bin/cloud-init'.
[2021-11-24T15:05:46.646Z] [    info] sizeof ProcessInternal is 56
[2021-11-24T15:05:46.648Z] [    info] Returning, pending output from stdout
[2021-11-24T15:05:46.648Z] [    info] Returning, pending output from stderr
[2021-11-24T15:05:49.957Z] [    info] Saving output from stdout
[2021-11-24T15:05:50.057Z] [    info] Process exited normally after 3 seconds, returned 0
[2021-11-24T15:05:50.057Z] [    info] No more output from stdout
[2021-11-24T15:05:50.057Z] [    info] No more output from stderr
[2021-11-24T15:05:50.057Z] [    info] Customization command output:
'/usr/bin/cloud-init 21.1-7.el8.alma
'.
[2021-11-24T15:05:50.057Z] [    info] cloud-init is installed.
[2021-11-24T15:05:50.057Z] [    info] Checking if cloud.cfg exists and if cloud-init is enabled.
[2021-11-24T15:05:50.057Z] [    info] Executing cloud-init workflow.
[2021-11-24T15:05:50.057Z] [    info] Creating temp directory '/var/run/vmware-imc' to copy customization files.
[2021-11-24T15:05:50.057Z] [   debug] Command to exec : '/bin/mkdir'.
[2021-11-24T15:05:50.057Z] [    info] sizeof ProcessInternal is 56
[2021-11-24T15:05:50.057Z] [    info] Returning, pending output from stdout
[2021-11-24T15:05:50.057Z] [    info] Returning, pending output from stderr
[2021-11-24T15:05:50.158Z] [    info] Process exited normally after 0 seconds, returned 0
[2021-11-24T15:05:50.158Z] [    info] No more output from stdout
[2021-11-24T15:05:50.158Z] [    info] No more output from stderr
[2021-11-24T15:05:50.158Z] [    info] Customization command output:
''.
[2021-11-24T15:05:50.158Z] [    info] Check if nics.txt exists. Copy if exists, skip otherwise.
[2021-11-24T15:05:50.158Z] [   debug] Command to exec : '/usr/bin/test'.
[2021-11-24T15:05:50.158Z] [    info] sizeof ProcessInternal is 56
[2021-11-24T15:05:50.158Z] [    info] Returning, pending output from stdout
[2021-11-24T15:05:50.158Z] [    info] Returning, pending output from stderr
[2021-11-24T15:05:50.258Z] [    info] Process exited normally after 0 seconds, returned 0
[2021-11-24T15:05:50.258Z] [    info] No more output from stdout
[2021-11-24T15:05:50.258Z] [    info] No more output from stderr
[2021-11-24T15:05:50.258Z] [    info] Customization command output:
''.
[2021-11-24T15:05:50.258Z] [    info] nics.txt file exists. Copying...
[2021-11-24T15:05:50.258Z] [   debug] Command to exec : '/bin/cp'.
[2021-11-24T15:05:50.258Z] [    info] sizeof ProcessInternal is 56
[2021-11-24T15:05:50.259Z] [    info] Returning, pending output from stdout
[2021-11-24T15:05:50.259Z] [    info] Returning, pending output from stderr
[2021-11-24T15:05:50.359Z] [    info] Process exited normally after 0 seconds, returned 0
[2021-11-24T15:05:50.359Z] [    info] No more output from stdout
[2021-11-24T15:05:50.359Z] [    info] No more output from stderr
[2021-11-24T15:05:50.359Z] [    info] Customization command output:
''.
[2021-11-24T15:05:50.359Z] [   debug] Command to exec : '/bin/mv'.
[2021-11-24T15:05:50.359Z] [    info] sizeof ProcessInternal is 56
[2021-11-24T15:05:50.359Z] [    info] Returning, pending output from stdout
[2021-11-24T15:05:50.359Z] [    info] Returning, pending output from stderr
[2021-11-24T15:05:50.459Z] [    info] Process exited normally after 0 seconds, returned 0
[2021-11-24T15:05:50.460Z] [    info] No more output from stdout
[2021-11-24T15:05:50.460Z] [    info] No more output from stderr
[2021-11-24T15:05:50.460Z] [    info] Customization command output:
''.
[2021-11-24T15:05:50.460Z] [    info] Check if custom script(pre/post customization) exists.
[2021-11-24T15:05:50.460Z] [    info] Copying main configuration file cust.cfg.
[2021-11-24T15:05:50.460Z] [   debug] Command to exec : '/bin/cp'.
[2021-11-24T15:05:50.460Z] [    info] sizeof ProcessInternal is 56
[2021-11-24T15:05:50.460Z] [    info] Returning, pending output from stdout
[2021-11-24T15:05:50.460Z] [    info] Returning, pending output from stderr
[2021-11-24T15:05:50.560Z] [    info] Process exited normally after 0 seconds, returned 0
[2021-11-24T15:05:50.560Z] [    info] No more output from stdout
[2021-11-24T15:05:50.560Z] [    info] No more output from stderr
[2021-11-24T15:05:50.560Z] [    info] Customization command output:
''.
[2021-11-24T15:05:50.560Z] [   debug] Command to exec : '/bin/mv'.
[2021-11-24T15:05:50.560Z] [    info] sizeof ProcessInternal is 56
[2021-11-24T15:05:50.561Z] [    info] Returning, pending output from stdout
[2021-11-24T15:05:50.561Z] [    info] Returning, pending output from stderr
[2021-11-24T15:05:50.661Z] [    info] Process exited normally after 0 seconds, returned 0
[2021-11-24T15:05:50.661Z] [    info] No more output from stdout
[2021-11-24T15:05:50.661Z] [    info] No more output from stderr
[2021-11-24T15:05:50.661Z] [    info] Customization command output:
''.
[2021-11-24T15:05:50.661Z] [    info] Deployment for cloud-init succeeded.
[2021-11-24T15:05:50.661Z] [    info] Transitioning from state 'INPROGRESS' to state 'Done'.
[2021-11-24T15:05:50.661Z] [    info] ENTER STATE 'Done'.
[2021-11-24T15:05:50.661Z] [    info] EXIT STATE 'INPROGRESS'.
[2021-11-24T15:05:50.661Z] [    info] Launching cleanup.
[2021-11-24T15:05:50.661Z] [   debug] Command to exec : '/bin/rm'.
[2021-11-24T15:05:50.661Z] [    info] sizeof ProcessInternal is 56
[2021-11-24T15:05:50.662Z] [    info] Returning, pending output from stdout
[2021-11-24T15:05:50.662Z] [    info] Returning, pending output from stderr
[2021-11-24T15:05:50.762Z] [    info] Process exited normally after 0 seconds, returned 0
[2021-11-24T15:05:50.762Z] [    info] No more output from stdout
[2021-11-24T15:05:50.762Z] [    info] No more output from stderr
[2021-11-24T15:05:50.762Z] [    info] Customization command output:
''.
[2021-11-24T15:05:50.762Z] [    info] sSkipReboot: 'true', forceSkipReboot 'false'.
[2021-11-24T15:05:50.762Z] [    info] Deployment delegated to Cloud-init. Returning success.
[2021-11-24T15:05:50.762Z] [   debug] Ran DeployPkg_DeployPackageFromFile successfully
[2021-11-24T15:05:50.762Z] [   debug] ## Closing log
toolsDeployPkg-2.log (8,181 bytes)   

kunalsing thakur

2023-03-06 18:40

reporter   ~0000834

https://koji.mbox.centos.org/koji/buildinfo?buildID=23263
Is someone has tried open-vm-tools 12

kunalsing thakur

2023-03-06 19:40

reporter   ~0000836

@drazenk can you provide solution ?

Issue History

Date Modified Username Field Change
2021-02-24 15:17 corporategadfly New Issue
2021-03-31 14:17 corporategadfly Note Added: 0000092
2021-03-31 16:02 alukoshko Assigned To => alukoshko
2021-03-31 16:02 alukoshko Status new => assigned
2021-03-31 16:10 alukoshko Note Added: 0000093
2021-03-31 16:10 alukoshko Status assigned => feedback
2021-03-31 16:14 corporategadfly Note Added: 0000094
2021-03-31 16:14 corporategadfly Status feedback => assigned
2021-03-31 16:15 corporategadfly Note Added: 0000095
2021-04-02 01:29 corporategadfly Note Added: 0000107
2021-05-06 23:08 corporategadfly Note Added: 0000180
2021-05-07 18:19 alukoshko Note Added: 0000181
2021-05-07 18:40 corporategadfly Note Added: 0000182
2021-05-07 20:23 corporategadfly Note Added: 0000183
2021-05-07 20:23 corporategadfly File Added: almalinux-bug-27-almalinux-8.4-failed-toolsDeployPkg.log
2021-05-07 20:23 corporategadfly File Added: almalinux-bug-27-centos-8-toolsDeployPkg.log
2021-05-07 20:47 alukoshko Note Added: 0000184
2021-05-07 20:49 alukoshko Note Edited: 0000184
2021-05-07 21:13 alukoshko Note Added: 0000185
2021-05-07 21:13 alukoshko File Added: open-vm-tools-11.1.0-2.el8.alma.x86_64.rpm
2021-05-07 21:13 alukoshko Note Added: 0000186
2021-05-07 21:13 alukoshko File Added: open-vm-tools-sdmp-11.1.0-2.el8.alma.x86_64.rpm
2021-05-07 21:13 alukoshko File Added: open-vm-tools-desktop-11.1.0-2.el8.alma.x86_64.rpm
2021-05-07 21:16 alukoshko Note Added: 0000187
2021-05-13 01:46 corporategadfly Note Added: 0000191
2021-05-13 01:46 corporategadfly File Added: almalinux-bug-27-almalinux-8.3-with-patched-open-vm-tools-failed-toolsDeployPkg.log
2021-05-13 01:47 corporategadfly Note Added: 0000192
2021-05-25 23:07 alukoshko Note Added: 0000212
2021-10-22 08:58 jordane fillatre Note Added: 0000357
2021-10-22 09:13 alukoshko Note Added: 0000358
2021-10-22 12:22 jordane fillatre Note Added: 0000360
2021-10-22 12:37 alukoshko Note Added: 0000361
2021-10-25 09:58 jordane fillatre Note Added: 0000366
2021-10-25 09:58 jordane fillatre File Added: toolsDeployPkg.log
2021-11-22 14:19 drazenk Note Added: 0000415
2021-11-22 14:56 alukoshko Note Added: 0000417
2021-11-25 20:29 drazenk Note Added: 0000428
2021-11-25 20:29 drazenk File Added: toolsDeployPkg-2.log
2023-03-06 18:40 kunalsing thakur Note Added: 0000834
2023-03-06 19:40 kunalsing thakur Note Added: 0000836